Documentation Index
Fetch the complete documentation index at: https://companyname-a7d5b98e-docs-new-structure-publish.mintlify.app/llms.txt
Use this file to discover all available pages before exploring further.
00 NOP
Does nothing.Category: Stack Basic (stack_basic)
Fift
0i XCHG_0I
Interchanges s0 with s[i], 1 <= i <= 15.Category: Stack Basic (stack_basic)
Fift
SWAP
Same ass1 XCHG0.
10ij XCHG_IJ
Interchanges s[i] with s[j], 1 <= i < j <= 15.Category: Stack Basic (stack_basic)
Fift
11ii XCHG_0I_LONG
Interchanges s0 with s[ii], 0 <= ii <= 255.Category: Stack Basic (stack_basic)
Fift
1i XCHG_1I
Interchanges s1 with s[i], 2 <= i <= 15.Category: Stack Basic (stack_basic)
Fift
2i PUSH
Pushes a copy of the old s[i] into the stack.Category: Stack Basic (stack_basic)
Fift
DUP
Same ass0 PUSH.OVER
Same ass1 PUSH.
3i POP
Pops the old s0 value into the old s[i].Category: Stack Basic (stack_basic)
Fift
DROP
Same ass0 POP, discards the top-of-stack value.NIP
Same ass1 POP.
4ijk XCHG3
Equivalent to s2 s[i] XCHG s1 s[j] XCHG s[k] XCHG0.Category: Stack Complex (stack_complex)
Fift
50ij XCHG2
Equivalent to s1 s[i] XCHG s[j] XCHG0.Category: Stack Complex (stack_complex)
Fift
51ij XCPU
Equivalent to s[i] XCHG0 s[j] PUSH.Category: Stack Complex (stack_complex)
Fift
52ij PUXC
Equivalent to s[i] PUSH SWAP s[j] XCHG0.Category: Stack Complex (stack_complex)
Fift
53ij PUSH2
Equivalent to s[i] PUSH s[j+1] PUSH.Category: Stack Complex (stack_complex)
Fift
540ijk XCHG3_ALT
Long form of XCHG3.Category: Stack Complex (stack_complex)
Fift
541ijk XC2PU
Equivalent to s[i] s[j] XCHG2 s[k] PUSH.Category: Stack Complex (stack_complex)
Fift
542ijk XCPUXC
Equivalent to s1 s[i] XCHG s[j] s[k-1] PUXC.Category: Stack Complex (stack_complex)
Fift
543ijk XCPU2
Equivalent to s[i] XCHG0 s[j] s[k] PUSH2.Category: Stack Complex (stack_complex)
Fift
544ijk PUXC2
Equivalent to s[i] PUSH s2 XCHG0 s[j] s[k] XCHG2.Category: Stack Complex (stack_complex)
Fift
545ijk PUXCPU
Equivalent to s[i] s[j-1] PUXC s[k] PUSH.Category: Stack Complex (stack_complex)
Fift
546ijk PU2XC
Equivalent to s[i] PUSH SWAP s[j] s[k-1] PUXC.Category: Stack Complex (stack_complex)
Fift
547ijk PUSH3
Equivalent to s[i] PUSH s[j+1] s[k+1] PUSH2.Category: Stack Complex (stack_complex)
Fift
55ij BLKSWAP
Permutes two blocks s[j+i+1] ... s[j+1] and s[j] ... s0.0 <= i,j <= 15Equivalent to
[i+1] [j+1] REVERSE [j+1] 0 REVERSE [i+j+2] 0 REVERSE.Category: Stack Complex (stack_complex)
Fift
ROT2
Rotates the three topmost pairs of stack entries.ROLL
Rotates the topi+1stack entries.
Equivalent to1 [i+1] BLKSWAP.ROLLREV
Rotates the topi+1stack entries in the other direction.
Equivalent to[i+1] 1 BLKSWAP.
56ii PUSH_LONG
Pushes a copy of the old s[ii] into the stack.0 <= ii <= 255Category: Stack Complex (stack_complex)
Fift
57ii POP_LONG
Pops the old s0 value into the old s[ii].0 <= ii <= 255Category: Stack Complex (stack_complex)
Fift
58 ROT
Equivalent to 1 2 BLKSWAP or to s2 s1 XCHG2.Category: Stack Complex (stack_complex)
Fift
59 ROTREV
Equivalent to 2 1 BLKSWAP or to s2 s2 XCHG2.Category: Stack Complex (stack_complex)
Fift
5A SWAP2
Equivalent to 2 2 BLKSWAP or to s3 s2 XCHG2.Category: Stack Complex (stack_complex)
Fift
5B DROP2
Equivalent to DROP DROP.Category: Stack Complex (stack_complex)
Fift
5C DUP2
Equivalent to s1 s0 PUSH2.Category: Stack Complex (stack_complex)
Fift
5D OVER2
Equivalent to s3 s2 PUSH2.Category: Stack Complex (stack_complex)
Fift
5Eij REVERSE
Reverses the order of s[j+i+1] ... s[j].Category: Stack Complex (stack_complex)
Fift
5F0i BLKDROP
Equivalent to DROP performed i times.Category: Stack Complex (stack_complex)
Fift
5Fij BLKPUSH
Equivalent to PUSH s(j) performed i times.1 <= i <= 15, 0 <= j <= 15.Category: Stack Complex (stack_complex)
Fift
60 PICK
Pops integer i from the stack, then performs s[i] PUSH.Category: Stack Complex (stack_complex)
Fift
61 ROLLX
Pops integer i from the stack, then performs 1 [i] BLKSWAP.Category: Stack Complex (stack_complex)
Fift
62 -ROLLX
Pops integer i from the stack, then performs [i] 1 BLKSWAP.Category: Stack Complex (stack_complex)
Fift
63 BLKSWX
Pops integers i,j from the stack, then performs [i] [j] BLKSWAP.Category: Stack Complex (stack_complex)
Fift
64 REVX
Pops integers i,j from the stack, then performs [i] [j] REVERSE.Category: Stack Complex (stack_complex)
Fift
65 DROPX
Pops integer i from the stack, then performs [i] BLKDROP.Category: Stack Complex (stack_complex)
Fift
66 TUCK
Equivalent to SWAP OVER or to s1 s1 XCPU.Category: Stack Complex (stack_complex)
Fift
67 XCHGX
Pops integer i from the stack, then performs s[i] XCHG.Category: Stack Complex (stack_complex)
Fift
68 DEPTH
Pushes the current depth of the stack.Category: Stack Complex (stack_complex)
Fift
69 CHKDEPTH
Pops integer i from the stack, then checks whether there are at least i elements, generating a stack underflow exception otherwise.Category: Stack Complex (stack_complex)
Fift
6A ONLYTOPX
Pops integer i from the stack, then removes all but the top i elements.Category: Stack Complex (stack_complex)
Fift
6B ONLYX
Pops integer i from the stack, then leaves only the bottom i elements. Approximately equivalent to DEPTH SWAP SUB DROPX.Category: Stack Complex (stack_complex)
Fift
6Cij BLKDROP2
Drops i stack elements under the top j elements.1 <= i <= 15, 0 <= j <= 15Equivalent to
[i+j] 0 REVERSE [i] BLKDROP [j] 0 REVERSE.Category: Stack Complex (stack_complex)
Fift
6D NULL
Pushes the only value of type Null.Category: Tuple (tuple)
Fift
NEWDICT
Returns a new empty dictionary.
It is an alternative mnemonics forPUSHNULL.
6E ISNULL
Checks whether x is a Null, and returns -1 or 0 accordingly.Category: Tuple (tuple)
Fift
DICTEMPTY
Checks whether dictionaryDis empty, and returns-1or0accordingly.
It is an alternative mnemonics forISNULL.
6F0n TUPLE
Creates a new Tuple t=(x_1, ... ,x_n) containing n values x_1,…, x_n.0 <= n <= 15Category: Tuple (tuple)
Fift
NIL
Pushes the only Tuplet=()of length zero.SINGLE
Creates a singletont:=(x), i.e., a Tuple of length one.PAIR
Creates pairt:=(x,y).TRIPLE
Creates triplet:=(x,y,z).
6F1k INDEX
Returns the k-th element of a Tuple t.0 <= k <= 15.Category: Tuple (tuple)
Fift
FIRST
Returns the first element of a Tuple.SECOND
Returns the second element of a Tuple.THIRD
Returns the third element of a Tuple.
6F2n UNTUPLE
Unpacks a Tuple t=(x_1,...,x_n) of length equal to 0 <= n <= 15.If
t is not a Tuple, or if |t| != n, a type check exception is thrown.Category: Tuple (tuple)
Fift
UNSINGLE
Unpacks a singletont=(x).UNPAIR
Unpacks a pairt=(x,y).UNTRIPLE
Unpacks a triplet=(x,y,z).
6F3k UNPACKFIRST
Unpacks first 0 <= k <= 15 elements of a Tuple t.If
|t|<k, throws a type check exception.Category: Tuple (tuple)
Fift
CHKTUPLE
Checks whethertis a Tuple. If not, throws a type check exception.
6F4n EXPLODE
Unpacks a Tuple t=(x_1,...,x_m) and returns its length m, but only if m <= n <= 15. Otherwise throws a type check exception.Category: Tuple (tuple)
Fift
6F5k SETINDEX
Computes Tuple t' that differs from t only at position t'_{k+1}, which is set to x.0 <= k <= 15If
k >= |t|, throws a range check exception.Category: Tuple (tuple)
Fift
SETFIRST
Sets the first component of Tuplettoxand returns the resulting Tuplet'.SETSECOND
Sets the second component of Tuplettoxand returns the resulting Tuplet'.SETTHIRD
Sets the third component of Tuplettoxand returns the resulting Tuplet'.
6F6k INDEXQ
Returns the k-th element of a Tuple t, where 0 <= k <= 15. In other words, returns x_{k+1} if t=(x_1,...,x_n). If k>=n, or if t is Null, returns a Null instead of x.Category: Tuple (tuple)
Fift
FIRSTQ
Returns the first element of a Tuple.SECONDQ
Returns the second element of a Tuple.THIRDQ
Returns the third element of a Tuple.
6F7k SETINDEXQ
Sets the k-th component of Tuple t to x, where 0 <= k < 16, and returns the resulting Tuple t'.If
|t| <= k, first extends the original Tuple to length n'=k+1 by setting all new components to Null. If the original value of t is Null, treats it as an empty Tuple. If t is not Null or Tuple, throws an exception. If x is Null and either |t| <= k or t is Null, then always returns t'=t (and does not consume tuple creation gas).Category: Tuple (tuple)
Fift
SETFIRSTQ
Sets the first component of Tuplettoxand returns the resulting Tuplet'.SETSECONDQ
Sets the second component of Tuplettoxand returns the resulting Tuplet'.SETTHIRDQ
Sets the third component of Tuplettoxand returns the resulting Tuplet'.
6F80 TUPLEVAR
Creates a new Tuple t of length n similarly to TUPLE, but with 0 <= n <= 255 taken from the stack.Category: Tuple (tuple)
Fift
6F81 INDEXVAR
Similar to k INDEX, but with 0 <= k <= 254 taken from the stack.Category: Tuple (tuple)
Fift
6F82 UNTUPLEVAR
Similar to n UNTUPLE, but with 0 <= n <= 255 taken from the stack.Category: Tuple (tuple)
Fift
6F83 UNPACKFIRSTVAR
Similar to n UNPACKFIRST, but with 0 <= n <= 255 taken from the stack.Category: Tuple (tuple)
Fift
6F84 EXPLODEVAR
Similar to n EXPLODE, but with 0 <= n <= 255 taken from the stack.Category: Tuple (tuple)
Fift
6F85 SETINDEXVAR
Similar to k SETINDEX, but with 0 <= k <= 254 taken from the stack.Category: Tuple (tuple)
Fift
6F86 INDEXVARQ
Similar to n INDEXQ, but with 0 <= k <= 254 taken from the stack.Category: Tuple (tuple)
Fift
6F87 SETINDEXVARQ
Similar to k SETINDEXQ, but with 0 <= k <= 254 taken from the stack.Category: Tuple (tuple)
Fift
6F88 TLEN
Returns the length of a Tuple.Category: Tuple (tuple)
Fift
6F89 QTLEN
Similar to TLEN, but returns -1 if t is not a Tuple.Category: Tuple (tuple)
Fift
6F8A ISTUPLE
Returns -1 or 0 depending on whether t is a Tuple.Category: Tuple (tuple)
Fift
6F8B LAST
Returns the last element of a non-empty Tuple t.Category: Tuple (tuple)
Fift
6F8C TPUSH
Appends a value x to a Tuple t=(x_1,...,x_n), but only if the resulting Tuple t'=(x_1,...,x_n,x) is of length at most 255. Otherwise throws a type check exception.Category: Tuple (tuple)
Fift
6F8D TPOP
Detaches the last element x=x_n from a non-empty Tuple t=(x_1,...,x_n), and returns both the resulting Tuple t'=(x_1,...,x_{n-1}) and the original last element x.Category: Tuple (tuple)
Fift
6FA0 NULLSWAPIF
Pushes a Null under the topmost Integer x, but only if x!=0.Category: Tuple (tuple)
Fift
6FA1 NULLSWAPIFNOT
Pushes a Null under the topmost Integer x, but only if x=0. May be used for stack alignment after quiet primitives such as PLDUXQ.Category: Tuple (tuple)
Fift
6FA2 NULLROTRIF
Pushes a Null under the second stack entry from the top, but only if the topmost Integer y is non-zero.Category: Tuple (tuple)
Fift
6FA3 NULLROTRIFNOT
Pushes a Null under the second stack entry from the top, but only if the topmost Integer y is zero. May be used for stack alignment after quiet primitives such as LDUXQ.Category: Tuple (tuple)
Fift
6FA4 NULLSWAPIF2
Pushes two nulls under the topmost Integer x, but only if x!=0.Equivalent to
NULLSWAPIF NULLSWAPIF.Category: Tuple (tuple)
Fift
6FA5 NULLSWAPIFNOT2
Pushes two nulls under the topmost Integer x, but only if x=0.Equivalent to
NULLSWAPIFNOT NULLSWAPIFNOT.Category: Tuple (tuple)
Fift
6FA6 NULLROTRIF2
Pushes two nulls under the second stack entry from the top, but only if the topmost Integer y is non-zero.Equivalent to
NULLROTRIF NULLROTRIF.Category: Tuple (tuple)
Fift
6FA7 NULLROTRIFNOT2
Pushes two nulls under the second stack entry from the top, but only if the topmost Integer y is zero.Equivalent to
NULLROTRIFNOT NULLROTRIFNOT.Category: Tuple (tuple)
Fift
6FBij INDEX2
Recovers x=(t_{i+1})_{j+1} for 0 <= i,j <= 3.Equivalent to
[i] INDEX [j] INDEX.Category: Tuple (tuple)
Fift
CADR
Recoversx=(t_2)_1.CDDR
Recoversx=(t_2)_2.
6FE_ijk INDEX3
Recovers x=t_{i+1}_{j+1}_{k+1}.0 <= i,j,k <= 3Equivalent to
[i] [j] INDEX2 [k] INDEX.Category: Tuple (tuple)
Fift
CADDR
Recoversx=t_2_2_1.CDDDR
Recoversx=t_2_2_2.
7i PUSHINT_4
Pushes integer x into the stack. -5 <= x <= 10.Here
i equals four lower-order bits of x (i=x mod 16).Category: Const Int (const_int)
Fift
ZEROONETWOTENTRUE
80xx PUSHINT_8
Pushes integer xx. -128 <= xx <= 127.Category: Const Int (const_int)
Fift
81xxxx PUSHINT_16
Pushes integer xxxx. -2^15 <= xx < 2^15.Category: Const Int (const_int)
Fift
82lxxx PUSHINT_LONG
Pushes integer xxx.Details: 5-bit
0 <= l <= 30 determines the length n=8l+19 of signed big-endian integer xxx.The total length of this instruction is
l+4 bytes or n+13=8l+32 bits.Category: Const Int (const_int)
Fift
83xx PUSHPOW2
(Quietly) pushes 2^(xx+1) for 0 <= xx <= 255.2^256 is a NaN.Category: Const Int (const_int)
Fift
83FF PUSHNAN
Pushes a NaN.Category: Const Int (const_int)
Fift
84xx PUSHPOW2DEC
Pushes 2^(xx+1)-1 for 0 <= xx <= 255.Category: Const Int (const_int)
Fift
85xx PUSHNEGPOW2
Pushes -2^(xx+1) for 0 <= xx <= 255.Category: Const Int (const_int)
Fift
88 PUSHREF
Pushes the reference ref into the stack.Details: Pushes the first reference of
cc.code into the stack as a Cell (and removes this reference from the current continuation).Category: Const Data (const_data)
Fift
89 PUSHREFSLICE
Similar to PUSHREF, but converts the cell into a Slice.Category: Const Data (const_data)
Fift
8A PUSHREFCONT
Similar to PUSHREFSLICE, but makes a simple ordinary Continuation out of the cell.Category: Const Data (const_data)
Fift
8Bxsss PUSHSLICE
Pushes the slice slice into the stack.Details: Pushes the (prefix) subslice of
cc.code consisting of its first 8x+4 bits and no references (i.e., essentially a bitstring), where 0 <= x <= 15.A completion tag is assumed, meaning that all trailing zeroes and the last binary one (if present) are removed from this bitstring.
If the original bitstring consists only of zeroes, an empty slice will be pushed.
Category: Const Data (const_data)
Fift
8Crxxssss PUSHSLICE_REFS
Pushes the slice slice into the stack.Details: Pushes the (prefix) subslice of
cc.code consisting of its first 1 <= r+1 <= 4 references and up to first 8xx+1 bits of data, with 0 <= xx <= 31.A completion tag is also assumed.
Category: Const Data (const_data)
Fift
8Drxxsssss PUSHSLICE_LONG
Pushes the slice slice into the stack.Details: Pushes the subslice of
cc.code consisting of 0 <= r <= 4 references and up to 8xx+6 bits of data, with 0 <= xx <= 127.A completion tag is assumed.
Category: Const Data (const_data)
Fift
8F_rxxcccc PUSHCONT
Pushes a continuation made from builder.Details: Pushes the simple ordinary continuation
cccc made from the first 0 <= r <= 3 references and the first 0 <= xx <= 127 bytes of cc.code.Category: Const Data (const_data)
Fift
9xccc PUSHCONT_SHORT
Pushes a continuation made from builder.Details: Pushes an
x-byte continuation for 0 <= x <= 15.Category: Const Data (const_data)
Fift
A0 ADD
Category: Arithm Basic (arithm_basic)
Fift
A1 SUB
Category: Arithm Basic (arithm_basic)
Fift
A2 SUBR
Equivalent to SWAP SUB.Category: Arithm Basic (arithm_basic)
Fift
A3 NEGATE
Equivalent to -1 MULCONST or to ZERO SUBR.Notice that it triggers an integer overflow exception if
x=-2^256.Category: Arithm Basic (arithm_basic)
Fift
A4 INC
Equivalent to 1 ADDCONST.Category: Arithm Basic (arithm_basic)
Fift
A5 DEC
Equivalent to -1 ADDCONST.Category: Arithm Basic (arithm_basic)
Fift
A6cc ADDCONST
-128 <= cc <= 127.Category: Arithm Basic (arithm_basic)
Fift
A7cc MULCONST
-128 <= cc <= 127.Category: Arithm Basic (arithm_basic)
Fift
A8 MUL
Category: Arithm Basic (arithm_basic)
Fift
A900 ADDDIVMOD
Category: Arithm Div (arithm_div)
Fift
A901 ADDDIVMODR
Category: Arithm Div (arithm_div)
Fift
A902 ADDDIVMODC
Category: Arithm Div (arithm_div)
Fift
A904 DIV
q=floor(x/y), r=x-y*qCategory: Arithm Div (arithm_div)
Fift
A905 DIVR
q'=round(x/y), r'=x-y*q'Category: Arithm Div (arithm_div)
Fift
A906 DIVC
q''=ceil(x/y), r''=x-y*q''Category: Arithm Div (arithm_div)
Fift
A908 MOD
Category: Arithm Div (arithm_div)
Fift
A909 MODR
Category: Arithm Div (arithm_div)
Fift
A90A MODC
Category: Arithm Div (arithm_div)
Fift
A90C DIVMOD
Category: Arithm Div (arithm_div)
Fift
A90D DIVMODR
Category: Arithm Div (arithm_div)
Fift
A90E DIVMODC
Category: Arithm Div (arithm_div)
Fift
A920 ADDRSHIFTMOD_VAR
Category: Arithm Div (arithm_div)
Fift
A921 ADDRSHIFTMODR
Category: Arithm Div (arithm_div)
Fift
A922 ADDRSHIFTMODC
Category: Arithm Div (arithm_div)
Fift
A925 RSHIFTR_VAR
Category: Arithm Div (arithm_div)
Fift
A926 RSHIFTC_VAR
Category: Arithm Div (arithm_div)
Fift
A928 MODPOW2_VAR
Category: Arithm Div (arithm_div)
Fift
A929 MODPOW2R_VAR
Category: Arithm Div (arithm_div)
Fift
A92A MODPOW2C_VAR
Category: Arithm Div (arithm_div)
Fift
A92C RSHIFTMOD_VAR
Category: Arithm Div (arithm_div)
Fift
A92D RSHIFTMODR_VAR
Category: Arithm Div (arithm_div)
Fift
A92E RSHIFTMODC_VAR
Category: Arithm Div (arithm_div)
Fift
A930tt ADDRSHIFTMOD
Category: Arithm Div (arithm_div)
Fift
A931tt ADDRSHIFTRMOD
Category: Arithm Div (arithm_div)
Fift
A932tt ADDRSHIFTCMOD
Category: Arithm Div (arithm_div)
Fift
A935tt RSHIFTR
Category: Arithm Div (arithm_div)
Fift
A936tt RSHIFTC
Category: Arithm Div (arithm_div)
Fift
A938tt MODPOW2
Category: Arithm Div (arithm_div)
Fift
A939tt MODPOW2R
Category: Arithm Div (arithm_div)
Fift
A93Att MODPOW2C
Category: Arithm Div (arithm_div)
Fift
A93Ctt RSHIFTMOD
Category: Arithm Div (arithm_div)
Fift
A93Dtt RSHIFTRMOD
Category: Arithm Div (arithm_div)
Fift
A93Ett RSHIFTCMOD
Category: Arithm Div (arithm_div)
Fift
A980 MULADDDIVMOD
Category: Arithm Div (arithm_div)
Fift
A981 MULADDDIVMODR
Category: Arithm Div (arithm_div)
Fift
A982 MULADDDIVMODC
Category: Arithm Div (arithm_div)
Fift
A984 MULDIV
q=floor(x*y/z)Category: Arithm Div (arithm_div)
Fift
A985 MULDIVR
q'=round(x*y/z)Category: Arithm Div (arithm_div)
Fift
A986 MULDIVC
q'=ceil(x*y/z)Category: Arithm Div (arithm_div)
Fift
A988 MULMOD
Category: Arithm Div (arithm_div)
Fift
A989 MULMODR
Category: Arithm Div (arithm_div)
Fift
A98A MULMODC
Category: Arithm Div (arithm_div)
Fift
A98C MULDIVMOD
q=floor(x*y/z), r=x*y-z*qCategory: Arithm Div (arithm_div)
Fift
A98D MULDIVMODR
q=round(x*y/z), r=x*y-z*qCategory: Arithm Div (arithm_div)
Fift
A98E MULDIVMODC
q=ceil(x*y/z), r=x*y-z*qCategory: Arithm Div (arithm_div)
Fift
A9A0 MULADDRSHIFTMOD_VAR
Category: Arithm Div (arithm_div)
Fift
A9A1 MULADDRSHIFTRMOD_VAR
Category: Arithm Div (arithm_div)
Fift
A9A2 MULADDRSHIFTCMOD_VAR
Category: Arithm Div (arithm_div)
Fift
A9A4 MULRSHIFT_VAR
0 <= z <= 256Category: Arithm Div (arithm_div)
Fift
A9A5 MULRSHIFTR_VAR
0 <= z <= 256Category: Arithm Div (arithm_div)
Fift
A9A6 MULRSHIFTC_VAR
0 <= z <= 256Category: Arithm Div (arithm_div)
Fift
A9A8 MULMODPOW2_VAR
Category: Arithm Div (arithm_div)
Fift
A9A9 MULMODPOW2R_VAR
Category: Arithm Div (arithm_div)
Fift
A9AA MULMODPOW2C_VAR
Category: Arithm Div (arithm_div)
Fift
A9AC MULRSHIFTMOD_VAR
Category: Arithm Div (arithm_div)
Fift
A9AD MULRSHIFTRMOD_VAR
Category: Arithm Div (arithm_div)
Fift
A9AE MULRSHIFTCMOD_VAR
Category: Arithm Div (arithm_div)
Fift
A9B0tt MULADDRSHIFTMOD
Category: Arithm Div (arithm_div)
Fift
A9B1tt MULADDRSHIFTRMOD
Category: Arithm Div (arithm_div)
Fift
A9B2tt MULADDRSHIFTCMOD
Category: Arithm Div (arithm_div)
Fift
A9B4tt MULRSHIFT
Category: Arithm Div (arithm_div)
Fift
A9B5tt MULRSHIFTR
Category: Arithm Div (arithm_div)
Fift
A9B6tt MULRSHIFTC
Category: Arithm Div (arithm_div)
Fift
A9B8tt MULMODPOW2
Category: Arithm Div (arithm_div)
Fift
A9B9tt MULMODPOW2R
Category: Arithm Div (arithm_div)
Fift
A9BAtt MULMODPOW2C
Category: Arithm Div (arithm_div)
Fift
A9BC MULRSHIFTMOD
Category: Arithm Div (arithm_div)
Fift
A9BD MULRSHIFTRMOD
Category: Arithm Div (arithm_div)
Fift
A9BE MULRSHIFTCMOD
Category: Arithm Div (arithm_div)
Fift
A9C0 LSHIFTADDDIVMOD_VAR
Category: Arithm Div (arithm_div)
Fift
A9C1 LSHIFTADDDIVMODR_VAR
Category: Arithm Div (arithm_div)
Fift
A9C2 LSHIFTADDDIVMODC_VAR
Category: Arithm Div (arithm_div)
Fift
A9C4 LSHIFTDIV_VAR
0 <= z <= 256Category: Arithm Div (arithm_div)
Fift
A9C5 LSHIFTDIVR_VAR
0 <= z <= 256Category: Arithm Div (arithm_div)
Fift
A9C6 LSHIFTDIVC_VAR
0 <= z <= 256Category: Arithm Div (arithm_div)
Fift
A9C8 LSHIFTMOD_VAR
Category: Arithm Div (arithm_div)
Fift
A9C9 LSHIFTMODR_VAR
Category: Arithm Div (arithm_div)
Fift
A9CA LSHIFTMODC_VAR
Category: Arithm Div (arithm_div)
Fift
A9CC LSHIFTDIVMOD_VAR
Category: Arithm Div (arithm_div)
Fift
A9CD LSHIFTDIVMODR_VAR
Category: Arithm Div (arithm_div)
Fift
A9CE LSHIFTDIVMODC_VAR
Category: Arithm Div (arithm_div)
Fift
A9D0tt LSHIFTADDDIVMOD
Category: Arithm Div (arithm_div)
Fift
A9D1tt LSHIFTADDDIVMODR
Category: Arithm Div (arithm_div)
Fift
A9D2tt LSHIFTADDDIVMODC
Category: Arithm Div (arithm_div)
Fift
A9D4tt LSHIFTDIV
Category: Arithm Div (arithm_div)
Fift
A9D5tt LSHIFTDIVR
Category: Arithm Div (arithm_div)
Fift
A9D6tt LSHIFTDIVC
Category: Arithm Div (arithm_div)
Fift
A9D8tt LSHIFTMOD
Category: Arithm Div (arithm_div)
Fift
A9D9tt LSHIFTMODR
Category: Arithm Div (arithm_div)
Fift
A9DAtt LSHIFTMODC
Category: Arithm Div (arithm_div)
Fift
A9DCtt LSHIFTDIVMOD
Category: Arithm Div (arithm_div)
Fift
A9DDtt LSHIFTDIVMODR
Category: Arithm Div (arithm_div)
Fift
A9DEtt LSHIFTDIVMODC
Category: Arithm Div (arithm_div)
Fift
AAcc LSHIFT
0 <= cc <= 255Category: Arithm Logical (arithm_logical)
Fift
ABcc RSHIFT
0 <= cc <= 255Category: Arithm Logical (arithm_logical)
Fift
AC LSHIFT_VAR
0 <= y <= 1023Category: Arithm Logical (arithm_logical)
Fift
AD RSHIFT_VAR
0 <= y <= 1023Category: Arithm Logical (arithm_logical)
Fift
AE POW2
0 <= y <= 1023Equivalent to
ONE SWAP LSHIFT.Category: Arithm Logical (arithm_logical)
Fift
B0 AND
Bitwise and of two signed integers x and y, sign-extended to infinity.Category: Arithm Logical (arithm_logical)
Fift
B1 OR
Bitwise or of two integers.Category: Arithm Logical (arithm_logical)
Fift
B2 XOR
Bitwise xor of two integers.Category: Arithm Logical (arithm_logical)
Fift
B3 NOT
Bitwise not of an integer.Category: Arithm Logical (arithm_logical)
Fift
B4cc FITS
Checks whether x is a cc+1-bit signed integer for 0 <= cc <= 255 (i.e., whether -2^cc <= x < 2^cc).If not, either triggers an integer overflow exception, or replaces
x with a NaN (quiet version).Category: Arithm Logical (arithm_logical)
Fift
CHKBOOL
Checks whetherxis a ”boolean value” (i.e., either 0 or -1).
B5cc UFITS
Checks whether x is a cc+1-bit unsigned integer for 0 <= cc <= 255 (i.e., whether 0 <= x < 2^(cc+1)).Category: Arithm Logical (arithm_logical)
Fift
CHKBIT
Checks whetherxis a binary digit (i.e., zero or one).
B600 FITSX
Checks whether x is a c-bit signed integer for 0 <= c <= 1023.Category: Arithm Logical (arithm_logical)
Fift
B601 UFITSX
Checks whether x is a c-bit unsigned integer for 0 <= c <= 1023.Category: Arithm Logical (arithm_logical)
Fift
B602 BITSIZE
Computes smallest c >= 0 such that x fits into a c-bit signed integer (-2^(c-1) <= c < 2^(c-1)).Category: Arithm Logical (arithm_logical)
Fift
B603 UBITSIZE
Computes smallest c >= 0 such that x fits into a c-bit unsigned integer (0 <= x < 2^c), or throws a range check exception.Category: Arithm Logical (arithm_logical)
Fift
B608 MIN
Computes the minimum of two integers x and y.Category: Arithm Logical (arithm_logical)
Fift
B609 MAX
Computes the maximum of two integers x and y.Category: Arithm Logical (arithm_logical)
Fift
B60A MINMAX
Sorts two integers. Quiet version of this operation returns two NaNs if any of the arguments are NaNs.Category: Arithm Logical (arithm_logical)
Fift
B60B ABS
Computes the absolute value of an integer x.Category: Arithm Logical (arithm_logical)
Fift
B7A0 QADD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A1 QSUB
Category: Arithm Quiet (arithm_quiet)
Fift
B7A2 QSUBR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A3 QNEGATE
Category: Arithm Quiet (arithm_quiet)
Fift
B7A4 QINC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A5 QDEC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A8 QMUL
Category: Arithm Quiet (arithm_quiet)
Fift
B7A900 QADDDIVMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A901 QADDDIVMODR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A902 QADDDIVMODC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A904 QDIV
Division returns NaN if y=0.Category: Arithm Quiet (arithm_quiet)
Fift
B7A905 QDIVR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A906 QDIVC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A908 QMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A909 QMODR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A90A QMODC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A90C QDIVMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A90D QDIVMODR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A90E QDIVMODC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A920 QADDRSHIFTMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A921 QADDRSHIFTMODR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A922 QADDRSHIFTMODC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A925 QRSHIFTR_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A926 QRSHIFTC_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A928 QMODPOW2_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A929 QMODPOW2R_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A92A QMODPOW2C_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A92C QRSHIFTMOD_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A92D QRSHIFTMODR_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A92E QRSHIFTMODC_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A930tt QADDRSHIFTMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A931tt QADDRSHIFTRMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A932tt QADDRSHIFTCMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A935tt QRSHIFTR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A936tt QRSHIFTC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A938tt QMODPOW2
Category: Arithm Quiet (arithm_quiet)
Fift
B7A939tt QMODPOW2R
Category: Arithm Quiet (arithm_quiet)
Fift
B7A93Att QMODPOW2C
Category: Arithm Quiet (arithm_quiet)
Fift
B7A93Ctt QRSHIFTMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A93Dtt QRSHIFTRMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A93Ett QRSHIFTCMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A980 QMULADDDIVMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A981 QMULADDDIVMODR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A982 QMULADDDIVMODC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A984 QMULDIV
q=floor(x*y/z)Category: Arithm Quiet (arithm_quiet)
Fift
B7A985 QMULDIVR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A986 QMULDIVC
q'=ceil(x*y/z)Category: Arithm Quiet (arithm_quiet)
Fift
B7A988 QMULMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A989 QMULMODR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A98A QMULMODC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A98C QMULDIVMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A98D QMULDIVMODR
q=round(x*y/z), r=x*y-z*qCategory: Arithm Quiet (arithm_quiet)
Fift
B7A98E QMULDIVMODC
q=ceil(x*y/z), r=x*y-z*qCategory: Arithm Quiet (arithm_quiet)
Fift
B7A9A0 QMULADDRSHIFTMOD_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9A1 QMULADDRSHIFTRMOD_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9A2 QMULADDRSHIFTCMOD_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9A4 QMULRSHIFT_VAR
0 <= z <= 256Category: Arithm Quiet (arithm_quiet)
Fift
B7A9A5 QMULRSHIFTR_VAR
0 <= z <= 256Category: Arithm Quiet (arithm_quiet)
Fift
B7A9A6 QMULRSHIFTC_VAR
0 <= z <= 256Category: Arithm Quiet (arithm_quiet)
Fift
B7A9A8 QMULMODPOW2_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9A9 QMULMODPOW2R_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9AA QMULMODPOW2C_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9AC QMULRSHIFTMOD_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9AD QMULRSHIFTRMOD_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9AE QMULRSHIFTCMOD_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9B0tt QMULADDRSHIFTMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9B1tt QMULADDRSHIFTRMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9B2tt QMULADDRSHIFTCMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9B4tt QMULRSHIFT
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9B5tt QMULRSHIFTR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9B6tt QMULRSHIFTC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9B8tt QMULMODPOW2
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9B9tt QMULMODPOW2R
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9BAtt QMULMODPOW2C
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9BC QMULRSHIFTMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9BD QMULRSHIFTRMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9BE QMULRSHIFTCMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9C0 QLSHIFTADDDIVMOD_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9C1 QLSHIFTADDDIVMODR_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9C2 QLSHIFTADDDIVMODC_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9C4 QLSHIFTDIV_VAR
0 <= z <= 256Category: Arithm Quiet (arithm_quiet)
Fift
B7A9C5 QLSHIFTDIVR_VAR
0 <= z <= 256Category: Arithm Quiet (arithm_quiet)
Fift
B7A9C6 QLSHIFTDIVC_VAR
0 <= z <= 256Category: Arithm Quiet (arithm_quiet)
Fift
B7A9C8 QLSHIFTMOD_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9C9 QLSHIFTMODR_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9CA QLSHIFTMODC_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9CC QLSHIFTDIVMOD_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9CD QLSHIFTDIVMODR_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9CE QLSHIFTDIVMODC_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9D0tt QLSHIFTADDDIVMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9D1tt QLSHIFTADDDIVMODR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9D2tt QLSHIFTADDDIVMODC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9D4tt QLSHIFTDIV
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9D5tt QLSHIFTDIVR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9D6tt QLSHIFTDIVC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9D8tt QLSHIFTMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9D9tt QLSHIFTMODR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9DAtt QLSHIFTMODC
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9DCtt QLSHIFTDIVMOD
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9DDtt QLSHIFTDIVMODR
Category: Arithm Quiet (arithm_quiet)
Fift
B7A9DEtt QLSHIFTDIVMODC
Category: Arithm Quiet (arithm_quiet)
Fift
B7AAcc QLSHIFT
0 <= cc <= 255Category: Arithm Quiet (arithm_quiet)
Fift
B7ABcc QRSHIFT
0 <= cc <= 255Category: Arithm Quiet (arithm_quiet)
Fift
B7AC QLSHIFT_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7AD QRSHIFT_VAR
Category: Arithm Quiet (arithm_quiet)
Fift
B7AE QPOW2
Category: Arithm Quiet (arithm_quiet)
Fift
B7B0 QAND
Category: Arithm Quiet (arithm_quiet)
Fift
B7B1 QOR
Category: Arithm Quiet (arithm_quiet)
Fift
B7B2 QXOR
Category: Arithm Quiet (arithm_quiet)
Fift
B7B3 QNOT
Category: Arithm Quiet (arithm_quiet)
Fift
B7B4cc QFITS
Replaces x with a NaN if x is not a cc+1-bit signed integer, leaves it intact otherwise.Category: Arithm Quiet (arithm_quiet)
Fift
B7B5cc QUFITS
Replaces x with a NaN if x is not a cc+1-bit unsigned integer, leaves it intact otherwise.Category: Arithm Quiet (arithm_quiet)
Fift
B7B600 QFITSX
Replaces x with a NaN if x is not a c-bit signed integer, leaves it intact otherwise.Category: Arithm Quiet (arithm_quiet)
Fift
B7B601 QUFITSX
Replaces x with a NaN if x is not a c-bit unsigned integer, leaves it intact otherwise.Category: Arithm Quiet (arithm_quiet)
Fift
B8 SGN
Computes the sign of an integer x:-1 if x<0, 0 if x=0, 1 if x>0.Category: Compare Int (compare_int)
Fift
B9 LESS
Returns -1 if x<y, 0 otherwise.Category: Compare Int (compare_int)
Fift
BA EQUAL
Returns -1 if x=y, 0 otherwise.Category: Compare Int (compare_int)
Fift
BB LEQ
Category: Compare Int (compare_int)
Fift
BC GREATER
Category: Compare Int (compare_int)
Fift
BD NEQ
Equivalent to EQUAL NOT.Category: Compare Int (compare_int)
Fift
BE GEQ
Equivalent to LESS NOT.Category: Compare Int (compare_int)
Fift
BF CMP
Computes the sign of x-y:-1 if x<y, 0 if x=y, 1 if x>y.No integer overflow can occur here unless
x or y is a NaN.Category: Compare Int (compare_int)
Fift
C0yy EQINT
Returns -1 if x=yy, 0 otherwise.-2^7 <= yy < 2^7.Category: Compare Int (compare_int)
Fift
ISZERO
Checks whether an integer is zero. Corresponds to Forth’s0=.
C1yy LESSINT
Returns -1 if x<yy, 0 otherwise.-2^7 <= yy < 2^7.Category: Compare Int (compare_int)
Fift
ISNEG
Checks whether an integer is negative. Corresponds to Forth’s0<.ISNPOS
Checks whether an integer is non-positive.
C2yy GTINT
Returns -1 if x>yy, 0 otherwise.-2^7 <= yy < 2^7.Category: Compare Int (compare_int)
Fift
ISPOS
Checks whether an integer is positive. Corresponds to Forth’s0>.ISNNEG
Checks whether an integer is non-negative.
C3yy NEQINT
Returns -1 if x!=yy, 0 otherwise.-2^7 <= yy < 2^7.Category: Compare Int (compare_int)
Fift
C4 ISNAN
Checks whether x is a NaN.Category: Compare Int (compare_int)
Fift
C5 CHKNAN
Throws an arithmetic overflow exception if x is a NaN.Category: Compare Int (compare_int)
Fift
C700 SEMPTY
Checks whether a Slice s is empty (i.e., contains no bits of data and no cell references).Category: Compare Other (compare_other)
Fift
C701 SDEMPTY
Checks whether Slice s has no bits of data.Category: Compare Other (compare_other)
Fift
C702 SREMPTY
Checks whether Slice s has no references.Category: Compare Other (compare_other)
Fift
C703 SDFIRST
Checks whether the first bit of Slice s is a one.Category: Compare Other (compare_other)
Fift
C704 SDLEXCMP
Compares the data of s lexicographically with the data of s', returning -1, 0, or 1 depending on the result.Category: Compare Other (compare_other)
Fift
C705 SDEQ
Checks whether the data parts of s and s' coincide, equivalent to SDLEXCMP ISZERO.Category: Compare Other (compare_other)
Fift
C708 SDPFX
Checks whether s is a prefix of s'.Category: Compare Other (compare_other)
Fift
C709 SDPFXREV
Checks whether s' is a prefix of s, equivalent to SWAP SDPFX.Category: Compare Other (compare_other)
Fift
C70A SDPPFX
Checks whether s is a proper prefix of s' (i.e., a prefix distinct from s').Category: Compare Other (compare_other)
Fift
C70B SDPPFXREV
Checks whether s' is a proper prefix of s.Category: Compare Other (compare_other)
Fift
C70C SDSFX
Checks whether s is a suffix of s'.Category: Compare Other (compare_other)
Fift
C70D SDSFXREV
Checks whether s' is a suffix of s.Category: Compare Other (compare_other)
Fift
C70E SDPSFX
Checks whether s is a proper suffix of s'.Category: Compare Other (compare_other)
Fift
C70F SDPSFXREV
Checks whether s' is a proper suffix of s.Category: Compare Other (compare_other)
Fift
C710 SDCNTLEAD0
Returns the number of leading zeroes in s.Category: Compare Other (compare_other)
Fift
C711 SDCNTLEAD1
Returns the number of leading ones in s.Category: Compare Other (compare_other)
Fift
C712 SDCNTTRAIL0
Returns the number of trailing zeroes in s.Category: Compare Other (compare_other)
Fift
C713 SDCNTTRAIL1
Returns the number of trailing ones in s.Category: Compare Other (compare_other)
Fift
C8 NEWC
Creates a new empty Builder.Category: Cell Build (cell_build)
Fift
C9 ENDC
Converts a Builder into an ordinary Cell.Category: Cell Build (cell_build)
Fift
CAcc STI
Stores a signed cc+1-bit integer x into Builder b for 0 <= cc <= 255, throws a range check exception if x does not fit into cc+1 bits.Category: Cell Build (cell_build)
Fift
CBcc STU
Stores an unsigned cc+1-bit integer x into Builder b. In all other respects it is similar to STI.Category: Cell Build (cell_build)
Fift
CC STREF
Stores a reference to Cell c into Builder b.Category: Cell Build (cell_build)
Fift
CD STBREFR
Equivalent to ENDC SWAP STREF.Category: Cell Build (cell_build)
Fift
CE STSLICE
Stores Slice s into Builder b.Category: Cell Build (cell_build)
Fift
STDICTS
Stores a Slice-represented dictionarysinto Builderb.
It is actually a synonym forSTSLICE.
CF00 STIX
Stores a signed l-bit integer x into b for 0 <= l <= 257.Category: Cell Build (cell_build)
Fift
CF01 STUX
Stores an unsigned l-bit integer x into b for 0 <= l <= 256.Category: Cell Build (cell_build)
Fift
CF02 STIXR
Similar to STIX, but with arguments in a different order.Category: Cell Build (cell_build)
Fift
CF03 STUXR
Similar to STUX, but with arguments in a different order.Category: Cell Build (cell_build)
Fift
CF04 STIXQ
A quiet version of STIX. If there is no space in b, sets b'=b and f=-1.If
x does not fit into l bits, sets b'=b and f=1.If the operation succeeds,
b' is the new Builder and f=0.However,
0 <= l <= 257, with a range check exception if this is not so.Category: Cell Build (cell_build)
Fift
CF05 STUXQ
A quiet version of STUX.Category: Cell Build (cell_build)
Fift
CF06 STIXRQ
A quiet version of STIXR.Category: Cell Build (cell_build)
Fift
CF07 STUXRQ
A quiet version of STUXR.Category: Cell Build (cell_build)
Fift
CF08cc STI_ALT
A longer version of [cc+1] STI.Category: Cell Build (cell_build)
Fift
CF09cc STU_ALT
A longer version of [cc+1] STU.Category: Cell Build (cell_build)
Fift
CF0Acc STIR
Equivalent to SWAP [cc+1] STI.Category: Cell Build (cell_build)
Fift
CF0Bcc STUR
Equivalent to SWAP [cc+1] STU.Category: Cell Build (cell_build)
Fift
CF0Ccc STIQ
A quiet version of STI.Category: Cell Build (cell_build)
Fift
CF0Dcc STUQ
A quiet version of STU.Category: Cell Build (cell_build)
Fift
CF0Ecc STIRQ
A quiet version of STIR.Category: Cell Build (cell_build)
Fift
CF0Fcc STURQ
A quiet version of STUR.Category: Cell Build (cell_build)
Fift
CF10 STREF_ALT
A longer version of STREF.Category: Cell Build (cell_build)
Fift
CF11 STBREF
Equivalent to SWAP STBREFR.Category: Cell Build (cell_build)
Fift
CF12 STSLICE_ALT
A longer version of STSLICE.Category: Cell Build (cell_build)
Fift
CF13 STB
Appends all data from Builder b' to Builder b.Category: Cell Build (cell_build)
Fift
CF14 STREFR
Equivalent to SWAP STREF.Category: Cell Build (cell_build)
Fift
CF15 STBREFR_ALT
A longer encoding of STBREFR.Category: Cell Build (cell_build)
Fift
CF16 STSLICER
Equivalent to SWAP STSLICE.Category: Cell Build (cell_build)
Fift
CF17 STBR
Concatenates two builders.Equivalent to
SWAP STB.Category: Cell Build (cell_build)
Fift
CF18 STREFQ
Quiet version of STREF.Category: Cell Build (cell_build)
Fift
CF19 STBREFQ
Quiet version of STBREF.Category: Cell Build (cell_build)
Fift
CF1A STSLICEQ
Quiet version of STSLICE.Category: Cell Build (cell_build)
Fift
CF1B STBQ
Quiet version of STB.Category: Cell Build (cell_build)
Fift
CF1C STREFRQ
Quiet version of STREFR.Category: Cell Build (cell_build)
Fift
CF1D STBREFRQ
Quiet version of STBREFR.Category: Cell Build (cell_build)
Fift
CF1E STSLICERQ
Quiet version of STSLICER.Category: Cell Build (cell_build)
Fift
CF1F STBRQ
Quiet version of STBR.Category: Cell Build (cell_build)
Fift
CF20 STREFCONST
Equivalent to PUSHREF STREFR.Category: Cell Build (cell_build)
Fift
CF21 STREF2CONST
Equivalent to STREFCONST STREFCONST.Category: Cell Build (cell_build)
Fift
CF23 ENDXC
If x!=0, creates a special or exotic cell from Builder b.The type of the exotic cell must be stored in the first 8 bits of
b.If
x=0, it is equivalent to ENDC. Otherwise some validity checks on the data and references of b are performed before creating the exotic cell.Category: Cell Build (cell_build)
Fift
CF28 STILE4
Stores a little-endian signed 32-bit integer.Category: Cell Build (cell_build)
Fift
CF29 STULE4
Stores a little-endian unsigned 32-bit integer.Category: Cell Build (cell_build)
Fift
CF2A STILE8
Stores a little-endian signed 64-bit integer.Category: Cell Build (cell_build)
Fift
CF2B STULE8
Stores a little-endian unsigned 64-bit integer.Category: Cell Build (cell_build)
Fift
CF30 BDEPTH
Returns the depth of Builder b. If no cell references are stored in b, then x=0; otherwise x is one plus the maximum of depths of cells referred to from b.Category: Cell Build (cell_build)
Fift
CF31 BBITS
Returns the number of data bits already stored in Builder b.Category: Cell Build (cell_build)
Fift
CF32 BREFS
Returns the number of cell references already stored in b.Category: Cell Build (cell_build)
Fift
CF33 BBITREFS
Returns the numbers of both data bits and cell references in b.Category: Cell Build (cell_build)
Fift
CF35 BREMBITS
Returns the number of data bits that can still be stored in b.Category: Cell Build (cell_build)
Fift
CF36 BREMREFS
Returns the number of references that can still be stored in b.Category: Cell Build (cell_build)
Fift
CF37 BREMBITREFS
Returns the numbers of both data bits and references that can still be stored in b.Category: Cell Build (cell_build)
Fift
CF38cc BCHKBITS
Checks whether cc+1 bits can be stored into b, where 0 <= cc <= 255.Category: Cell Build (cell_build)
Fift
CF39 BCHKBITS_VAR
Checks whether x bits can be stored into b, 0 <= x <= 1023. If there is no space for x more bits in b, or if x is not within the range 0...1023, throws an exception.Category: Cell Build (cell_build)
Fift
CF3A BCHKREFS
Checks whether y references can be stored into b, 0 <= y <= 7.Category: Cell Build (cell_build)
Fift
CF3B BCHKBITREFS
Checks whether x bits and y references can be stored into b, 0 <= x <= 1023, 0 <= y <= 7.Category: Cell Build (cell_build)
Fift
CF3Ccc BCHKBITSQ
Checks whether cc+1 bits can be stored into b, where 0 <= cc <= 255.Category: Cell Build (cell_build)
Fift
CF3D BCHKBITSQ_VAR
Checks whether x bits can be stored into b, 0 <= x <= 1023.Category: Cell Build (cell_build)
Fift
CF3E BCHKREFSQ
Checks whether y references can be stored into b, 0 <= y <= 7.Category: Cell Build (cell_build)
Fift
CF3F BCHKBITREFSQ
Checks whether x bits and y references can be stored into b, 0 <= x <= 1023, 0 <= y <= 7.Category: Cell Build (cell_build)
Fift
CF40 STZEROES
Stores n binary zeroes into Builder b.Category: Cell Build (cell_build)
Fift
CF41 STONES
Stores n binary ones into Builder b.Category: Cell Build (cell_build)
Fift
CF42 STSAME
Stores n binary xes (0 <= x <= 1) into Builder b.Category: Cell Build (cell_build)
Fift
CF50 BTOS
Same as ENDC CTOS, but without gas cost for cell creation and loading.Category: Cell Build (cell_build)
Fift
CFC_xysss STSLICECONST
Stores a constant subslice sss.Details:
sss consists of 0 <= x <= 3 references and up to 8y+2 data bits, with 0 <= y <= 7. Completion bit is assumed.Note that the assembler can replace
STSLICECONST with PUSHSLICE STSLICER if the slice is too big.Category: Cell Build (cell_build)
Fift
STZERO
Stores one binary zero.STONE
Stores one binary one.
D0 CTOS
Converts a Cell into a Slice. Notice that c must be either an ordinary cell, or an exotic cell which is automatically loaded to yield an ordinary cell c', converted into a Slice afterwards.Category: Cell Parse (cell_parse)
Fift
D1 ENDS
Removes a Slice s from the stack, and throws an exception if it is not empty.Category: Cell Parse (cell_parse)
Fift
D2cc LDI
Loads (i.e., parses) a signed cc+1-bit integer x from Slice s, and returns the remainder of s as s'.Category: Cell Parse (cell_parse)
Fift
D3cc LDU
Loads an unsigned cc+1-bit integer x from Slice s.Category: Cell Parse (cell_parse)
Fift
D4 LDREF
Loads a cell reference c from s.Category: Cell Parse (cell_parse)
Fift
D5 LDREFRTOS
Equivalent to LDREF SWAP CTOS.Category: Cell Parse (cell_parse)
Fift
D6cc LDSLICE
Cuts the next cc+1 bits of s into a separate Slice s''.Category: Cell Parse (cell_parse)
Fift
D700 LDIX
Loads a signed l-bit (0 <= l <= 257) integer x from Slice s, and returns the remainder of s as s'.Category: Cell Parse (cell_parse)
Fift
D701 LDUX
Loads an unsigned l-bit integer x from (the first l bits of) s, with 0 <= l <= 256.Category: Cell Parse (cell_parse)
Fift
D702 PLDIX
Preloads a signed l-bit integer from Slice s, for 0 <= l <= 257.Category: Cell Parse (cell_parse)
Fift
D703 PLDUX
Preloads an unsigned l-bit integer from s, for 0 <= l <= 256.Category: Cell Parse (cell_parse)
Fift
D704 LDIXQ
Quiet version of LDIX: loads a signed l-bit integer from s similarly to LDIX, but returns a success flag, equal to -1 on success or to 0 on failure (if s does not have l bits), instead of throwing a cell underflow exception.Category: Cell Parse (cell_parse)
Fift
D705 LDUXQ
Quiet version of LDUX.Category: Cell Parse (cell_parse)
Fift
D706 PLDIXQ
Quiet version of PLDIX.Category: Cell Parse (cell_parse)
Fift
D707 PLDUXQ
Quiet version of PLDUX.Category: Cell Parse (cell_parse)
Fift
D708cc LDI_ALT
A longer encoding for LDI.Category: Cell Parse (cell_parse)
Fift
D709cc LDU_ALT
A longer encoding for LDU.Category: Cell Parse (cell_parse)
Fift
D70Acc PLDI
Preloads a signed cc+1-bit integer from Slice s.Category: Cell Parse (cell_parse)
Fift
D70Bcc PLDU
Preloads an unsigned cc+1-bit integer from s.Category: Cell Parse (cell_parse)
Fift
D70Ccc LDIQ
A quiet version of LDI.Category: Cell Parse (cell_parse)
Fift
D70Dcc LDUQ
A quiet version of LDU.Category: Cell Parse (cell_parse)
Fift
D70Ecc PLDIQ
A quiet version of PLDI.Category: Cell Parse (cell_parse)
Fift
D70Fcc PLDUQ
A quiet version of PLDU.Category: Cell Parse (cell_parse)
Fift
D714_c PLDUZ
Preloads the first 32(c+1) bits of Slice s into an unsigned integer x, for 0 <= c <= 7. If s is shorter than necessary, missing bits are assumed to be zero. This operation is intended to be used along with IFBITJMP and similar instructions.Category: Cell Parse (cell_parse)
Fift
D718 LDSLICEX
Loads the first 0 <= l <= 1023 bits from Slice s into a separate Slice s'', returning the remainder of s as s'.Category: Cell Parse (cell_parse)
Fift
D719 PLDSLICEX
Returns the first 0 <= l <= 1023 bits of s as s''.Category: Cell Parse (cell_parse)
Fift
D71A LDSLICEXQ
A quiet version of LDSLICEX.Category: Cell Parse (cell_parse)
Fift
D71B PLDSLICEXQ
A quiet version of LDSLICEXQ.Category: Cell Parse (cell_parse)
Fift
D71Ccc LDSLICE_ALT
A longer encoding for LDSLICE.Category: Cell Parse (cell_parse)
Fift
D71Dcc PLDSLICE
Returns the first 0 < cc+1 <= 256 bits of s as s''.Category: Cell Parse (cell_parse)
Fift
D71Ecc LDSLICEQ
A quiet version of LDSLICE.Category: Cell Parse (cell_parse)
Fift
D71Fcc PLDSLICEQ
A quiet version of PLDSLICE.Category: Cell Parse (cell_parse)
Fift
D720 SDCUTFIRST
Returns the first 0 <= l <= 1023 bits of s. It is equivalent to PLDSLICEX.Category: Cell Parse (cell_parse)
Fift
D721 SDSKIPFIRST
Returns all but the first 0 <= l <= 1023 bits of s. It is equivalent to LDSLICEX NIP.Category: Cell Parse (cell_parse)
Fift
D722 SDCUTLAST
Returns the last 0 <= l <= 1023 bits of s.Category: Cell Parse (cell_parse)
Fift
D723 SDSKIPLAST
Returns all but the last 0 <= l <= 1023 bits of s.Category: Cell Parse (cell_parse)
Fift
D724 SDSUBSTR
Returns 0 <= l' <= 1023 bits of s starting from offset 0 <= l <= 1023, thus extracting a bit substring out of the data of s.Category: Cell Parse (cell_parse)
Fift
D726 SDBEGINSX
Checks whether s begins with (the data bits of) s', and removes s' from s on success. On failure throws a cell deserialization exception. Primitive SDPFXREV can be considered a quiet version of SDBEGINSX.Category: Cell Parse (cell_parse)
Fift
D727 SDBEGINSXQ
A quiet version of SDBEGINSX.Category: Cell Parse (cell_parse)
Fift
D72A_xsss SDBEGINS
Checks whether s begins with constant bitstring sss of length 8x+3 (with continuation bit assumed), where 0 <= x <= 127, and removes sss from s on success.Category: Cell Parse (cell_parse)
Fift
D72E_xsss SDBEGINSQ
A quiet version of SDBEGINS.Category: Cell Parse (cell_parse)
Fift
D730 SCUTFIRST
Returns the first 0 <= l <= 1023 bits and first 0 <= r <= 4 references of s.Category: Cell Parse (cell_parse)
Fift
D731 SSKIPFIRST
Returns all but the first l bits of s and r references of s.Category: Cell Parse (cell_parse)
Fift
D732 SCUTLAST
Returns the last 0 <= l <= 1023 data bits and last 0 <= r <= 4 references of s.Category: Cell Parse (cell_parse)
Fift
D733 SSKIPLAST
Returns all but the last l bits of s and r references of s.Category: Cell Parse (cell_parse)
Fift
D734 SUBSLICE
Returns 0 <= l' <= 1023 bits and 0 <= r' <= 4 references from Slice s, after skipping the first 0 <= l <= 1023 bits and first 0 <= r <= 4 references.Category: Cell Parse (cell_parse)
Fift
D736 SPLIT
Splits the first 0 <= l <= 1023 data bits and first 0 <= r <= 4 references from s into s', returning the remainder of s as s''.Category: Cell Parse (cell_parse)
Fift
D737 SPLITQ
A quiet version of SPLIT.Category: Cell Parse (cell_parse)
Fift
D739 XCTOS
Transforms an ordinary or exotic cell into a Slice, as if it were an ordinary cell. A flag is returned indicating whether c is exotic. If that be the case, its type can later be deserialized from the first eight bits of s.Category: Cell Parse (cell_parse)
Fift
D73A XLOAD
Loads an exotic cell c and returns an ordinary cell c'. If c is already ordinary, does nothing. If c cannot be loaded, throws an exception.Category: Cell Parse (cell_parse)
Fift
D73B XLOADQ
Loads an exotic cell c and returns an ordinary cell c'. If c is already ordinary, does nothing. If c cannot be loaded, returns 0.Category: Cell Parse (cell_parse)
Fift
D741 SCHKBITS
Checks whether there are at least l data bits in Slice s. If this is not the case, throws a cell deserialisation (i.e., cell underflow) exception.Category: Cell Parse (cell_parse)
Fift
D742 SCHKREFS
Checks whether there are at least r references in Slice s.Category: Cell Parse (cell_parse)
Fift
D743 SCHKBITREFS
Checks whether there are at least l data bits and r references in Slice s.Category: Cell Parse (cell_parse)
Fift
D745 SCHKBITSQ
Checks whether there are at least l data bits in Slice s.Category: Cell Parse (cell_parse)
Fift
D746 SCHKREFSQ
Checks whether there are at least r references in Slice s.Category: Cell Parse (cell_parse)
Fift
D747 SCHKBITREFSQ
Checks whether there are at least l data bits and r references in Slice s.Category: Cell Parse (cell_parse)
Fift
D748 PLDREFVAR
Returns the n-th cell reference of Slice s for 0 <= n <= 3.Category: Cell Parse (cell_parse)
Fift
D749 SBITS
Returns the number of data bits in Slice s.Category: Cell Parse (cell_parse)
Fift
D74A SREFS
Returns the number of references in Slice s.Category: Cell Parse (cell_parse)
Fift
D74B SBITREFS
Returns both the number of data bits and the number of references in s.Category: Cell Parse (cell_parse)
Fift
D74E_n PLDREFIDX
Returns the n-th cell reference of Slice s, where 0 <= n <= 3.Category: Cell Parse (cell_parse)
Fift
PLDREF
Preloads the first cell reference of a Slice.
D750 LDILE4
Loads a little-endian signed 32-bit integer.Category: Cell Parse (cell_parse)
Fift
D751 LDULE4
Loads a little-endian unsigned 32-bit integer.Category: Cell Parse (cell_parse)
Fift
D752 LDILE8
Loads a little-endian signed 64-bit integer.Category: Cell Parse (cell_parse)
Fift
D753 LDULE8
Loads a little-endian unsigned 64-bit integer.Category: Cell Parse (cell_parse)
Fift
D754 PLDILE4
Preloads a little-endian signed 32-bit integer.Category: Cell Parse (cell_parse)
Fift
D755 PLDULE4
Preloads a little-endian unsigned 32-bit integer.Category: Cell Parse (cell_parse)
Fift
D756 PLDILE8
Preloads a little-endian signed 64-bit integer.Category: Cell Parse (cell_parse)
Fift
D757 PLDULE8
Preloads a little-endian unsigned 64-bit integer.Category: Cell Parse (cell_parse)
Fift
D758 LDILE4Q
Quietly loads a little-endian signed 32-bit integer.Category: Cell Parse (cell_parse)
Fift
D759 LDULE4Q
Quietly loads a little-endian unsigned 32-bit integer.Category: Cell Parse (cell_parse)
Fift
D75A LDILE8Q
Quietly loads a little-endian signed 64-bit integer.Category: Cell Parse (cell_parse)
Fift
D75B LDULE8Q
Quietly loads a little-endian unsigned 64-bit integer.Category: Cell Parse (cell_parse)
Fift
D75C PLDILE4Q
Quietly preloads a little-endian signed 32-bit integer.Category: Cell Parse (cell_parse)
Fift
D75D PLDULE4Q
Quietly preloads a little-endian unsigned 32-bit integer.Category: Cell Parse (cell_parse)
Fift
D75E PLDILE8Q
Quietly preloads a little-endian signed 64-bit integer.Category: Cell Parse (cell_parse)
Fift
D75F PLDULE8Q
Quietly preloads a little-endian unsigned 64-bit integer.Category: Cell Parse (cell_parse)
Fift
D760 LDZEROES
Returns the count n of leading zero bits in s, and removes these bits from s.Category: Cell Parse (cell_parse)
Fift
D761 LDONES
Returns the count n of leading one bits in s, and removes these bits from s.Category: Cell Parse (cell_parse)
Fift
D762 LDSAME
Returns the count n of leading bits equal to 0 <= x <= 1 in s, and removes these bits from s.Category: Cell Parse (cell_parse)
Fift
D764 SDEPTH
Returns the depth of Slice s. If s has no references, then x=0; otherwise x is one plus the maximum of depths of cells referred to from s.Category: Cell Parse (cell_parse)
Fift
D765 CDEPTH
Returns the depth of Cell c. If c has no references, then x=0; otherwise x is one plus the maximum of depths of cells referred to from c. If c is a Null instead of a Cell, returns zero.Category: Cell Parse (cell_parse)
Fift
D766 CLEVEL
Returns level of the cell.Category: Cell Parse (cell_parse)
Fift
D767 CLEVELMASK
Returns level mask of the cell.Category: Cell Parse (cell_parse)
Fift
D76A_ CHASHI
Returns ith hash of the cell.Category: Cell Parse (cell_parse)
Fift
D76E_ CDEPTHI
Returns ith depth of the cell.Category: Cell Parse (cell_parse)
Fift
D770 CHASHIX
Returns ith hash of the cell.Category: Cell Parse (cell_parse)
Fift
D771 CDEPTHIX
Returns ith depth of the cell.Category: Cell Parse (cell_parse)
Fift
D8 EXECUTE
Calls, or executes, continuation c.Category: Cont Basic (cont_basic)
Fift
D9 JMPX
Jumps, or transfers control, to continuation c.The remainder of the previous current continuation
cc is discarded.Category: Cont Basic (cont_basic)
Fift
DApr CALLXARGS
Calls continuation c with p parameters and expecting r return values0 <= p <= 15, 0 <= r <= 15Category: Cont Basic (cont_basic)
Fift
DB0p CALLXARGS_VAR
Calls continuation c with 0 <= p <= 15 parameters, expecting an arbitrary number of return values.Category: Cont Basic (cont_basic)
Fift
DB1p JMPXARGS
Jumps to continuation c, passing only the top 0 <= p <= 15 values from the current stack to it (the remainder of the current stack is discarded).Category: Cont Basic (cont_basic)
Fift
DB2r RETARGS
Returns to c0, with 0 <= r <= 15 return values taken from the current stack.Category: Cont Basic (cont_basic)
Fift
DB30 RET
Returns to the continuation at c0. The remainder of the current continuation cc is discarded.Approximately equivalent to
c0 PUSHCTR JMPX.Category: Cont Basic (cont_basic)
Fift
DB31 RETALT
Returns to the continuation at c1.Approximately equivalent to
c1 PUSHCTR JMPX.Category: Cont Basic (cont_basic)
Fift
DB32 BRANCH
Performs RETTRUE if integer f!=0, or RETFALSE if f=0.Category: Cont Basic (cont_basic)
Fift
DB34 CALLCC
Call with current continuation, transfers control to c, pushing the old value of cc into c’s stack (instead of discarding it or writing it into new c0).Category: Cont Basic (cont_basic)
Fift
DB35 JMPXDATA
Similar to CALLCC, but the remainder of the current continuation (the old value of cc) is converted into a Slice before pushing it into the stack of c.Category: Cont Basic (cont_basic)
Fift
DB36pr CALLCCARGS
Similar to CALLXARGS, but pushes the old value of cc (along with the top 0 <= p <= 15 values from the original stack) into the stack of newly-invoked continuation c, setting cc.nargs to -1 <= r <= 14.Category: Cont Basic (cont_basic)
Fift
DB38 CALLXVARARGS
Similar to CALLXARGS, but takes -1 <= p,r <= 254 from the stack. The next three operations also take p and r from the stack, both in the range -1...254.Category: Cont Basic (cont_basic)
Fift
DB39 RETVARARGS
Similar to RETARGS.Category: Cont Basic (cont_basic)
Fift
DB3A JMPXVARARGS
Similar to JMPXARGS.Category: Cont Basic (cont_basic)
Fift
DB3B CALLCCVARARGS
Similar to CALLCCARGS.Category: Cont Basic (cont_basic)
Fift
DB3C CALLREF
Equivalent to PUSHREFCONT CALLX.Category: Cont Basic (cont_basic)
Fift
DB3D JMPREF
Equivalent to PUSHREFCONT JMPX.Category: Cont Basic (cont_basic)
Fift
DB3E JMPREFDATA
Equivalent to PUSHREFCONT JMPXDATA.Category: Cont Basic (cont_basic)
Fift
DB3F RETDATA
Equivalent to c0 PUSHCTR JMPXDATA. In this way, the remainder of the current continuation is converted into a Slice and returned to the caller.Category: Cont Basic (cont_basic)
Fift
DB4fff RUNVM
Runs child VM with code code and stack x_1...x_n. Returns the resulting stack x'_1...x'_m and exitcode. Other arguments and return values are enabled by flags.Flags operate similarly to
RUNVMX in Fift:-
+1: sets c3 to code.-
+2: pushes an implicit 0 before executing the code.-
+4: takes persistent data c4 from the stack and returns its final value.-
+8: takes the gas limit g_l from the stack and returns the consumed gas g_c.-
+16: takes c7 (smart contract context) from the stack.-
+32: returns the final value of c5 (actions).-
+64: pops the hard gas limit g_m enabled by ACCEPT from the stack.-
+128: enables “isolated gas consumption”, meaning the child VM maintains a separate set of visited cells and a chksgn counter.-
+256: pops an integer r and ensures exactly r values are returned from the top of the stack:- If
RUNVM call succeeds and r is set, it returns r elements. If r is not set, it returns all available elements.- If
RUNVM is successful but lacks elements on the stack, meaning the stack depth is less than r, it is treated as an exception in the child VM. The exit_code is set to -3, and exit_arg is set to 0, so 0 is returned as the only stack element.- If
RUNVM fails with an exception, only one element is returned, exit_arg, which should not be confused with exit_code.- In the case of running out of gas,
exit_code is set to -14, and exit_arg contains the amount of gas.Gas cost:
- 66 gas;
- 1 gas for each stack element passed to the child VM (the first 32 elements are free);
- 1 gas for each stack element returned from the child VM (the first 32 elements are free).
Category: Cont Basic (cont_basic)
Fift
DB50 RUNVMX
Runs child VM with code code and stack x_1...x_n. Returns the resulting stack x'_1...x'_m and exitcode. Other arguments and return values are enabled by flags.Flags operate similarly to
RUNVMX in Fift:-
+1: sets c3 to code.-
+2: pushes an implicit 0 before executing the code.-
+4: takes persistent data c4 from the stack and returns its final value.-
+8: takes the gas limit g_l from the stack and returns the consumed gas g_c.-
+16: takes c7 (smart contract context) from the stack.-
+32: returns the final value of c5 (actions).-
+64: pops the hard gas limit g_m enabled by ACCEPT from the stack.-
+128: enables “isolated gas consumption”, meaning the child VM maintains a separate set of visited cells and a chksgn counter.-
+256: pops an integer r and ensures exactly r values are returned from the top of the stack:- If
RUNVM call succeeds and r is set, it returns r elements. If r is not set, it returns all available elements.- If
RUNVM is successful but lacks elements on the stack, meaning the stack depth is less than r, it is treated as an exception in the child VM. The exit_code is set to -3, and exit_arg is set to 0, so 0 is returned as the only stack element.- If
RUNVM fails with an exception, only one element is returned, exit_arg, which should not be confused with exit_code.- In the case of running out of gas,
exit_code is set to -14, and exit_arg contains the amount of gas.Gas cost:
- 66 gas;
- 1 gas for each stack element passed to the child VM (the first 32 elements are free);
- 1 gas for each stack element returned from the child VM (the first 32 elements are free).
Category: Cont Basic (cont_basic)
Fift
DC IFRET
Performs a RET, but only if integer f is non-zero. If f is a NaN, throws an integer overflow exception.Category: Cont Conditional (cont_conditional)
Fift
DD IFNOTRET
Performs a RET, but only if integer f is zero.Category: Cont Conditional (cont_conditional)
Fift
DE IF
Performs EXECUTE for c (i.e., executes c), but only if integer f is non-zero. Otherwise simply discards both values.Category: Cont Conditional (cont_conditional)
Fift
DF IFNOT
Executes continuation c, but only if integer f is zero. Otherwise simply discards both values.Category: Cont Conditional (cont_conditional)
Fift
E0 IFJMP
Jumps to c (similarly to JMPX), but only if f is non-zero.Category: Cont Conditional (cont_conditional)
Fift
E1 IFNOTJMP
Jumps to c (similarly to JMPX), but only if f is zero.Category: Cont Conditional (cont_conditional)
Fift
E2 IFELSE
If integer f is non-zero, executes c, otherwise executes c'. Equivalent to CONDSELCHK EXECUTE.Category: Cont Conditional (cont_conditional)
Fift
E300 IFREF
Equivalent to PUSHREFCONT IF, with the optimization that the cell reference is not actually loaded into a Slice and then converted into an ordinary Continuation if f=0.Gas consumption of this primitive depends on whether
f=0 and whether the reference was loaded before.Similar remarks apply other primitives that accept a continuation as a reference.
Category: Cont Conditional (cont_conditional)
Fift
E301 IFNOTREF
Equivalent to PUSHREFCONT IFNOT.Category: Cont Conditional (cont_conditional)
Fift
E302 IFJMPREF
Equivalent to PUSHREFCONT IFJMP.Category: Cont Conditional (cont_conditional)
Fift
E303 IFNOTJMPREF
Equivalent to PUSHREFCONT IFNOTJMP.Category: Cont Conditional (cont_conditional)
Fift
E304 CONDSEL
If integer f is non-zero, returns x, otherwise returns y. Notice that no type checks are performed on x and y; as such, it is more like a conditional stack operation. Roughly equivalent to ROT ISZERO INC ROLLX NIP.Category: Cont Conditional (cont_conditional)
Fift
E305 CONDSELCHK
Same as CONDSEL, but first checks whether x and y have the same type.Category: Cont Conditional (cont_conditional)
Fift
E308 IFRETALT
Performs RETALT if integer f!=0.Category: Cont Conditional (cont_conditional)
Fift
E309 IFNOTRETALT
Performs RETALT if integer f=0.Category: Cont Conditional (cont_conditional)
Fift
E30D IFREFELSE
Equivalent to PUSHREFCONT SWAP IFELSE, with the optimization that the cell reference is not actually loaded into a Slice and then converted into an ordinary Continuation if f=0. Similar remarks apply to the next two primitives: cells are converted into continuations only when necessary.Category: Cont Conditional (cont_conditional)
Fift
E30E IFELSEREF
Equivalent to PUSHREFCONT IFELSE.Category: Cont Conditional (cont_conditional)
Fift
E30F IFREFELSEREF
Equivalent to PUSHREFCONT PUSHREFCONT IFELSE.Category: Cont Conditional (cont_conditional)
Fift
E39_n IFBITJMP
Checks whether bit 0 <= n <= 31 is set in integer x, and if so, performs JMPX to continuation c. Value x is left in the stack.Category: Cont Conditional (cont_conditional)
Fift
E3B_n IFNBITJMP
Jumps to c if bit 0 <= n <= 31 is not set in integer x.Category: Cont Conditional (cont_conditional)
Fift
E3D_n IFBITJMPREF
Performs a JMPREF if bit 0 <= n <= 31 is set in integer x.Category: Cont Conditional (cont_conditional)
Fift
E3F_n IFNBITJMPREF
Performs a JMPREF if bit 0 <= n <= 31 is not set in integer x.Category: Cont Conditional (cont_conditional)
Fift
E4 REPEAT
Executes continuation c n times, if integer n is non-negative. If n>=2^31 or n<-2^31, generates a range check exception.Notice that a
RET inside the code of c works as a continue, not as a break. One should use either alternative (experimental) loops or alternative RETALT (along with a SETEXITALT before the loop) to break out of a loop.Category: Cont Loops (cont_loops)
Fift
E5 REPEATEND
Similar to REPEAT, but it is applied to the current continuation cc.Category: Cont Loops (cont_loops)
Fift
E6 UNTIL
Executes continuation c, then pops an integer x from the resulting stack. If x is zero, performs another iteration of this loop. The actual implementation of this primitive involves an extraordinary continuation ec_until with its arguments set to the body of the loop (continuation c) and the original current continuation cc. This extraordinary continuation is then saved into the savelist of c as c.c0 and the modified c is then executed. The other loop primitives are implemented similarly with the aid of suitable extraordinary continuations.Category: Cont Loops (cont_loops)
Fift
E7 UNTILEND
Similar to UNTIL, but executes the current continuation cc in a loop. When the loop exit condition is satisfied, performs a RET.Category: Cont Loops (cont_loops)
Fift
E8 WHILE
Executes c' and pops an integer x from the resulting stack. If x is zero, exists the loop and transfers control to the original cc. If x is non-zero, executes c, and then begins a new iteration.Category: Cont Loops (cont_loops)
Fift
E9 WHILEEND
Similar to WHILE, but uses the current continuation cc as the loop body.Category: Cont Loops (cont_loops)
Fift
EA AGAIN
Similar to REPEAT, but executes c infinitely many times. A RET only begins a new iteration of the infinite loop, which can be exited only by an exception, or a RETALT (or an explicit JMPX).Category: Cont Loops (cont_loops)
Fift
EB AGAINEND
Similar to AGAIN, but performed with respect to the current continuation cc.Category: Cont Loops (cont_loops)
Fift
E314 REPEATBRK
Similar to REPEAT, but also sets c1 to the original cc after saving the old value of c1 into the savelist of the original cc. In this way RETALT could be used to break out of the loop body.Category: Cont Loops (cont_loops)
Fift
E315 REPEATENDBRK
Similar to REPEATEND, but also sets c1 to the original c0 after saving the old value of c1 into the savelist of the original c0. Equivalent to SAMEALTSAVE REPEATEND.Category: Cont Loops (cont_loops)
Fift
E316 UNTILBRK
Similar to UNTIL, but also modifies c1 in the same way as REPEATBRK.Category: Cont Loops (cont_loops)
Fift
E317 UNTILENDBRK
Equivalent to SAMEALTSAVE UNTILEND.Category: Cont Loops (cont_loops)
Fift
E318 WHILEBRK
Similar to WHILE, but also modifies c1 in the same way as REPEATBRK.Category: Cont Loops (cont_loops)
Fift
E319 WHILEENDBRK
Equivalent to SAMEALTSAVE WHILEEND.Category: Cont Loops (cont_loops)
Fift
E31A AGAINBRK
Similar to AGAIN, but also modifies c1 in the same way as REPEATBRK.Category: Cont Loops (cont_loops)
Fift
E31B AGAINENDBRK
Equivalent to SAMEALTSAVE AGAINEND.Category: Cont Loops (cont_loops)
Fift
ECrn SETCONTARGS_N
Pushes 0 <= r <= 15 values x_1...x_r into the stack of (a copy of) the continuation c, starting with x_1. When n is 15 (-1 in Fift notation), does nothing with c.nargs. For 0 <= n <= 14, sets c.nargs to the final size of the stack of c' plus n. In other words, transforms c into a closure or a partially applied function, with 0 <= n <= 14 arguments missing.Category: Cont Stack (cont_stack)
Fift
SETNUMARGS
Setsc.nargstonplus the current depth ofc’s stack, where0 <= n <= 14. Ifc.nargsis already set to a non-negative value, does nothing.SETCONTARGS
Pushes0 <= r <= 15valuesx_1...x_rinto the stack of (a copy of) the continuationc, starting withx_1. If the final depth ofc’s stack turns out to be greater thanc.nargs, a stack overflow exception is generated.
ED0p RETURNARGS
Leaves only the top 0 <= p <= 15 values in the current stack (somewhat similarly to ONLYTOPX), with all the unused bottom values not discarded, but saved into continuation c0 in the same way as SETCONTARGS does.Category: Cont Stack (cont_stack)
Fift
ED10 RETURNVARARGS
Similar to RETURNARGS, but with Integer 0 <= p <= 255 taken from the stack.Category: Cont Stack (cont_stack)
Fift
ED11 SETCONTVARARGS
Similar to SETCONTARGS, but with 0 <= r <= 255 and -1 <= n <= 255 taken from the stack.Category: Cont Stack (cont_stack)
Fift
ED12 SETNUMVARARGS
-1 <= n <= 255If
n=-1, this operation does nothing (c'=c).Otherwise its action is similar to
[n] SETNUMARGS, but with n taken from the stack.Category: Cont Stack (cont_stack)
Fift
ED1E BLESS
Transforms a Slice s into a simple ordinary continuation c, with c.code=s and an empty stack and savelist.Category: Cont Create (cont_create)
Fift
ED1F BLESSVARARGS
Equivalent to ROT BLESS ROTREV SETCONTVARARGS.Category: Cont Create (cont_create)
Fift
EErn BLESSARGS
0 <= r <= 15, -1 <= n <= 14Equivalent to
BLESS [r] [n] SETCONTARGS.The value of
n is represented inside the instruction by the 4-bit integer n mod 16.Category: Cont Create (cont_create)
Fift
BLESSNUMARGS
Also transforms a Slicesinto a Continuationc, but setsc.nargsto0 <= n <= 14.
ED4i PUSHCTR
Pushes the current value of control register c(i). If the control register is not supported in the current codepage, or if it does not have a value, an exception is triggered.Category: Cont Registers (cont_registers)
Fift
PUSHROOT
Pushes the ”global data root” cell reference, thus enabling access to persistent smart-contract data.
ED5i POPCTR
Pops a value x from the stack and stores it into control register c(i), if supported in the current codepage. Notice that if a control register accepts only values of a specific type, a type-checking exception may occur.Category: Cont Registers (cont_registers)
Fift
POPROOT
Sets the ”global data root” cell reference, thus allowing modification of persistent smart-contract data.
ED6i SETCONTCTR
Stores x into the savelist of continuation c as c(i), and returns the resulting continuation c'. Almost all operations with continuations may be expressed in terms of SETCONTCTR, POPCTR, and PUSHCTR.Category: Cont Registers (cont_registers)
Fift
ED7i SETRETCTR
Equivalent to c0 PUSHCTR c[i] SETCONTCTR c0 POPCTR.Category: Cont Registers (cont_registers)
Fift
ED8i SETALTCTR
Equivalent to c1 PUSHCTR c[i] SETCONTCTR c1 POPCTR.Category: Cont Registers (cont_registers)
Fift
ED9i POPSAVE
Similar to c[i] POPCTR, but also saves the old value of c[i] into continuation c0.Equivalent (up to exceptions) to
c[i] SAVECTR c[i] POPCTR.Category: Cont Registers (cont_registers)
Fift
EDAi SAVE
Saves the current value of c(i) into the savelist of continuation c0. If an entry for c[i] is already present in the savelist of c0, nothing is done. Equivalent to c[i] PUSHCTR c[i] SETRETCTR.Category: Cont Registers (cont_registers)
Fift
EDBi SAVEALT
Similar to c[i] SAVE, but saves the current value of c[i] into the savelist of c1, not c0.Category: Cont Registers (cont_registers)
Fift
EDCi SAVEBOTH
Equivalent to c[i] SAVE c[i] SAVEALT.Category: Cont Registers (cont_registers)
Fift
EDE0 PUSHCTRX
Similar to c[i] PUSHCTR, but with i, 0 <= i <= 255, taken from the stack.Notice that this primitive is one of the few ”exotic” primitives, which are not polymorphic like stack manipulation primitives, and at the same time do not have well-defined types of parameters and return values, because the type of
x depends on i.Category: Cont Registers (cont_registers)
Fift
EDE1 POPCTRX
Similar to c[i] POPCTR, but with 0 <= i <= 255 from the stack.Category: Cont Registers (cont_registers)
Fift
EDE2 SETCONTCTRX
Similar to c[i] SETCONTCTR, but with 0 <= i <= 255 from the stack.Category: Cont Registers (cont_registers)
Fift
EDE3mm SETCONTCTRMANY
Takes continuation, performs the equivalent of c[i] PUSHCTR SWAP c[i] SETCONTCNR for each i that is set in mask (mask is in 0..255).Category: Cont Registers (cont_registers)
Fift
EDE4 SETCONTCTRMANYX
Takes continuation, performs the equivalent of c[i] PUSHCTR SWAP c[i] SETCONTCNR for each i that is set in mask (mask is in 0..255).Category: Cont Registers (cont_registers)
Fift
EDF0 COMPOS
Computes the composition compose0(c, c'), which has the meaning of ”perform c, and, if successful, perform c'” (if c is a boolean circuit) or simply ”perform c, then c'”. Equivalent to SWAP c0 SETCONT.Category: Cont Registers (cont_registers)
Fift
EDF1 COMPOSALT
Computes the alternative composition compose1(c, c'), which has the meaning of ”perform c, and, if not successful, perform c'” (if c is a boolean circuit). Equivalent to SWAP c1 SETCONT.Category: Cont Registers (cont_registers)
Fift
EDF2 COMPOSBOTH
Computes composition compose1(compose0(c, c'), c'), which has the meaning of ”compute boolean circuit c, then compute c', regardless of the result of c”.Category: Cont Registers (cont_registers)
Fift
EDF3 ATEXIT
Sets c0 to compose0(c, c0). In other words, c will be executed before exiting current subroutine.Category: Cont Registers (cont_registers)
Fift
EDF4 ATEXITALT
Sets c1 to compose1(c, c1). In other words, c will be executed before exiting current subroutine by its alternative return path.Category: Cont Registers (cont_registers)
Fift
EDF5 SETEXITALT
Sets c1 to compose1(compose0(c, c0), c1),In this way, a subsequent
RETALT will first execute c, then transfer control to the original c0. This can be used, for instance, to exit from nested loops.Category: Cont Registers (cont_registers)
Fift
EDF6 THENRET
Computes compose0(c, c0).Category: Cont Registers (cont_registers)
Fift
EDF7 THENRETALT
Computes compose0(c, c1)Category: Cont Registers (cont_registers)
Fift
EDF8 INVERT
Interchanges c0 and c1.Category: Cont Registers (cont_registers)
Fift
EDF9 BOOLEVAL
Performs cc:=compose1(compose0(c, compose0(-1 PUSHINT, cc)), compose0(0 PUSHINT, cc)). If c represents a boolean circuit, the net effect is to evaluate it and push either -1 or 0 into the stack before continuing.Category: Cont Registers (cont_registers)
Fift
EDFA SAMEALT
Sets c1 to c0. Equivalent to c0 PUSHCTR c1 POPCTR.Category: Cont Registers (cont_registers)
Fift
EDFB SAMEALTSAVE
Sets c1 to c0, but first saves the old value of c1 into the savelist of c0.Equivalent to
c1 SAVE SAMEALT.Category: Cont Registers (cont_registers)
Fift
F0nn CALLDICT
Calls the continuation in c3, pushing integer 0 <= nn <= 255 into its stack as an argument.Approximately equivalent to
[nn] PUSHINT c3 PUSHCTR EXECUTE.Category: Cont Dict (cont_dict)
Fift
F12_n CALLDICT_LONG
For 0 <= n < 2^14, an encoding of [n] CALL for larger values of n.Category: Cont Dict (cont_dict)
Fift
F16_n JMPDICT
Jumps to the continuation in c3, pushing integer 0 <= n < 2^14 as its argument.Approximately equivalent to
n PUSHINT c3 PUSHCTR JMPX.Category: Cont Dict (cont_dict)
Fift
F1A_n PREPAREDICT
Equivalent to n PUSHINT c3 PUSHCTR, for 0 <= n < 2^14.In this way,
[n] CALL is approximately equivalent to [n] PREPARE EXECUTE, and [n] JMP is approximately equivalent to [n] PREPARE JMPX.One might use, for instance,
CALLXARGS or CALLCC instead of EXECUTE here.Category: Cont Dict (cont_dict)
Fift
F22_n THROW_SHORT
Throws exception 0 <= n <= 63 with parameter zero.In other words, it transfers control to the continuation in
c2, pushing 0 and n into its stack, and discarding the old stack altogether.Category: Exceptions (exceptions)
Fift
F26_n THROWIF_SHORT
Throws exception 0 <= n <= 63 with parameter zero only if integer f!=0.Category: Exceptions (exceptions)
Fift
F2A_n THROWIFNOT_SHORT
Throws exception 0 <= n <= 63 with parameter zero only if integer f=0.Category: Exceptions (exceptions)
Fift
F2C4_n THROW
For 0 <= n < 2^11, an encoding of [n] THROW for larger values of n.Category: Exceptions (exceptions)
Fift
F2CC_n THROWARG
Throws exception 0 <= n < 2^11 with parameter x, by copying x and n into the stack of c2 and transferring control to c2.Category: Exceptions (exceptions)
Fift
F2D4_n THROWIF
For 0 <= n < 2^11, an encoding of [n] THROWIF for larger values of n.Category: Exceptions (exceptions)
Fift
F2DC_n THROWARGIF
Throws exception 0 <= nn < 2^11 with parameter x only if integer f!=0.Category: Exceptions (exceptions)
Fift
F2E4_n THROWIFNOT
For 0 <= n < 2^11, an encoding of [n] THROWIFNOT for larger values of n.Category: Exceptions (exceptions)
Fift
F2EC_n THROWARGIFNOT
Throws exception 0 <= n < 2^11 with parameter x only if integer f=0.Category: Exceptions (exceptions)
Fift
F2F0 THROWANY
Throws exception 0 <= n < 2^16 with parameter zero.Approximately equivalent to
ZERO SWAP THROWARGANY.Category: Exceptions (exceptions)
Fift
F2F1 THROWARGANY
Throws exception 0 <= n < 2^16 with parameter x, transferring control to the continuation in c2.Approximately equivalent to
c2 PUSHCTR 2 JMPXARGS.Category: Exceptions (exceptions)
Fift
F2F2 THROWANYIF
Throws exception 0 <= n < 2^16 with parameter zero only if f!=0.Category: Exceptions (exceptions)
Fift
F2F3 THROWARGANYIF
Throws exception 0 <= n<2^16 with parameter x only if f!=0.Category: Exceptions (exceptions)
Fift
F2F4 THROWANYIFNOT
Throws exception 0 <= n<2^16 with parameter zero only if f=0.Category: Exceptions (exceptions)
Fift
F2F5 THROWARGANYIFNOT
Throws exception 0 <= n<2^16 with parameter x only if f=0.Category: Exceptions (exceptions)
Fift
F2FF TRY
Sets c2 to c', first saving the old value of c2 both into the savelist of c' and into the savelist of the current continuation, which is stored into c.c0 and c'.c0. Then runs c similarly to EXECUTE. If c does not throw any exceptions, the original value of c2 is automatically restored on return from c. If an exception occurs, the execution is transferred to c', but the original value of c2 is restored in the process, so that c' can re-throw the exception by THROWANY if it cannot handle it by itself.Category: Exceptions (exceptions)
Fift
F3pr TRYARGS
Similar to TRY, but with [p] [r] CALLXARGS internally used instead of EXECUTE.In this way, all but the top
0 <= p <= 15 stack elements will be saved into current continuation’s stack, and then restored upon return from either c or c', with the top 0 <= r <= 15 values of the resulting stack of c or c' copied as return values.Category: Exceptions (exceptions)
Fift
F400 STDICT
Stores dictionary D into Builder b, returning the resulting Builder b'.In other words, if
D is a cell, performs STONE and STREF; if D is Null, performs NIP and STZERO; otherwise throws a type checking exception.Category: Dict Serial (dict_serial)
Fift
F401 SKIPDICT
Equivalent to LDDICT NIP.Category: Dict Serial (dict_serial)
Fift
F402 LDDICTS
Loads (parses) a (Slice-represented) dictionary s' from Slice s, and returns the remainder of s as s''.This is a ”split function” for all
HashmapE(n,X) dictionary types.Category: Dict Serial (dict_serial)
Fift
F403 PLDDICTS
Preloads a (Slice-represented) dictionary s' from Slice s.Approximately equivalent to
LDDICTS DROP.Category: Dict Serial (dict_serial)
Fift
F404 LDDICT
Loads (parses) a dictionary D from Slice s, and returns the remainder of s as s'. May be applied to dictionaries or to values of arbitrary (^Y)? types.Category: Dict Serial (dict_serial)
Fift
F405 PLDDICT
Preloads a dictionary D from Slice s.Approximately equivalent to
LDDICT DROP.Category: Dict Serial (dict_serial)
Fift
F406 LDDICTQ
A quiet version of LDDICT.Category: Dict Serial (dict_serial)
Fift
F407 PLDDICTQ
A quiet version of PLDDICT.Category: Dict Serial (dict_serial)
Fift
F40A DICTGET
Looks up key k (represented by a Slice, the first 0 <= n <= 1023 data bits of which are used as a key) in dictionary D of type HashmapE(n,X) with n-bit keys.On success, returns the value found as a Slice
x.Category: Dict Get (dict_get)
Fift
F40B DICTGETREF
Similar to DICTGET, but with a LDREF ENDS applied to x on success.This operation is useful for dictionaries of type
HashmapE(n,^Y).Category: Dict Get (dict_get)
Fift
F40C DICTIGET
Similar to DICTGET, but with a signed (big-endian) n-bit Integer i as a key. If i does not fit into n bits, returns 0. If i is a NaN, throws an integer overflow exception.Category: Dict Get (dict_get)
Fift
F40D DICTIGETREF
Combines DICTIGET with DICTGETREF: it uses signed n-bit Integer i as a key and returns a Cell instead of a Slice on success.Category: Dict Get (dict_get)
Fift
F40E DICTUGET
Similar to DICTIGET, but with unsigned (big-endian) n-bit Integer i used as a key.Category: Dict Get (dict_get)
Fift
F40F DICTUGETREF
Similar to DICTIGETREF, but with an unsigned n-bit Integer key i.Category: Dict Get (dict_get)
Fift
F412 DICTSET
Sets the value associated with n-bit key k (represented by a Slice as in DICTGET) in dictionary D (also represented by a Slice) to value x (again a Slice), and returns the resulting dictionary as D'.Category: Dict Set (dict_set)
Fift
F413 DICTSETREF
Similar to DICTSET, but with the value set to a reference to Cell c.Category: Dict Set (dict_set)
Fift
F414 DICTISET
Similar to DICTSET, but with the key represented by a (big-endian) signed n-bit integer i. If i does not fit into n bits, a range check exception is generated.Category: Dict Set (dict_set)
Fift
F415 DICTISETREF
Similar to DICTSETREF, but with the key a signed n-bit integer as in DICTISET.Category: Dict Set (dict_set)
Fift
F416 DICTUSET
Similar to DICTISET, but with i an unsigned n-bit integer.Category: Dict Set (dict_set)
Fift
F417 DICTUSETREF
Similar to DICTISETREF, but with i unsigned.Category: Dict Set (dict_set)
Fift
F41A DICTSETGET
Combines DICTSET with DICTGET: it sets the value corresponding to key k to x, but also returns the old value y associated with the key in question, if present.Category: Dict Set (dict_set)
Fift
F41B DICTSETGETREF
Combines DICTSETREF with DICTGETREF similarly to DICTSETGET.Category: Dict Set (dict_set)
Fift
F41C DICTISETGET
DICTISETGET, but with i a signed n-bit integer.Category: Dict Set (dict_set)
Fift
F41D DICTISETGETREF
DICTISETGETREF, but with i a signed n-bit integer.Category: Dict Set (dict_set)
Fift
F41E DICTUSETGET
DICTISETGET, but with i an unsigned n-bit integer.Category: Dict Set (dict_set)
Fift
F41F DICTUSETGETREF
DICTISETGETREF, but with i an unsigned n-bit integer.Category: Dict Set (dict_set)
Fift
F422 DICTREPLACE
A Replace operation, which is similar to DICTSET, but sets the value of key k in dictionary D to x only if the key k was already present in D.Category: Dict Set (dict_set)
Fift
F423 DICTREPLACEREF
A Replace counterpart of DICTSETREF.Category: Dict Set (dict_set)
Fift
F424 DICTIREPLACE
DICTREPLACE, but with i a signed n-bit integer.Category: Dict Set (dict_set)
Fift
F425 DICTIREPLACEREF
DICTREPLACEREF, but with i a signed n-bit integer.Category: Dict Set (dict_set)
Fift
F426 DICTUREPLACE
DICTREPLACE, but with i an unsigned n-bit integer.Category: Dict Set (dict_set)
Fift
F427 DICTUREPLACEREF
DICTREPLACEREF, but with i an unsigned n-bit integer.Category: Dict Set (dict_set)
Fift
F42A DICTREPLACEGET
A Replace counterpart of DICTSETGET: on success, also returns the old value associated with the key in question.Category: Dict Set (dict_set)
Fift
F42B DICTREPLACEGETREF
A Replace counterpart of DICTSETGETREF.Category: Dict Set (dict_set)
Fift
F42C DICTIREPLACEGET
DICTREPLACEGET, but with i a signed n-bit integer.Category: Dict Set (dict_set)
Fift
F42D DICTIREPLACEGETREF
DICTREPLACEGETREF, but with i a signed n-bit integer.Category: Dict Set (dict_set)
Fift
F42E DICTUREPLACEGET
DICTREPLACEGET, but with i an unsigned n-bit integer.Category: Dict Set (dict_set)
Fift
F42F DICTUREPLACEGETREF
DICTREPLACEGETREF, but with i an unsigned n-bit integer.Category: Dict Set (dict_set)
Fift
F432 DICTADD
An Add counterpart of DICTSET: sets the value associated with key k in dictionary D to x, but only if it is not already present in D.Category: Dict Set (dict_set)
Fift
F433 DICTADDREF
An Add counterpart of DICTSETREF.Category: Dict Set (dict_set)
Fift
F434 DICTIADD
DICTADD, but with i a signed n-bit integer.Category: Dict Set (dict_set)
Fift
F435 DICTIADDREF
DICTADDREF, but with i a signed n-bit integer.Category: Dict Set (dict_set)
Fift
F436 DICTUADD
DICTADD, but with i an unsigned n-bit integer.Category: Dict Set (dict_set)
Fift
F437 DICTUADDREF
DICTADDREF, but with i an unsigned n-bit integer.Category: Dict Set (dict_set)
Fift
F43A DICTADDGET
An Add counterpart of DICTSETGET: sets the value associated with key k in dictionary D to x, but only if key k is not already present in D. Otherwise, just returns the old value y without changing the dictionary.Category: Dict Set (dict_set)
Fift
F43B DICTADDGETREF
An Add counterpart of DICTSETGETREF.Category: Dict Set (dict_set)
Fift
F43C DICTIADDGET
DICTADDGET, but with i a signed n-bit integer.Category: Dict Set (dict_set)
Fift
F43D DICTIADDGETREF
DICTADDGETREF, but with i a signed n-bit integer.Category: Dict Set (dict_set)
Fift
F43E DICTUADDGET
DICTADDGET, but with i an unsigned n-bit integer.Category: Dict Set (dict_set)
Fift
F43F DICTUADDGETREF
DICTADDGETREF, but with i an unsigned n-bit integer.Category: Dict Set (dict_set)
Fift
F441 DICTSETB
Category: Dict Set Builder (dict_set_builder)
Fift
F442 DICTISETB
Category: Dict Set Builder (dict_set_builder)
Fift
F443 DICTUSETB
Category: Dict Set Builder (dict_set_builder)
Fift
F445 DICTSETGETB
Category: Dict Set Builder (dict_set_builder)
Fift
F446 DICTISETGETB
Category: Dict Set Builder (dict_set_builder)
Fift
F447 DICTUSETGETB
Category: Dict Set Builder (dict_set_builder)
Fift
F449 DICTREPLACEB
Category: Dict Set Builder (dict_set_builder)
Fift
F44A DICTIREPLACEB
Category: Dict Set Builder (dict_set_builder)
Fift
F44B DICTUREPLACEB
Category: Dict Set Builder (dict_set_builder)
Fift
F44D DICTREPLACEGETB
Category: Dict Set Builder (dict_set_builder)
Fift
F44E DICTIREPLACEGETB
Category: Dict Set Builder (dict_set_builder)
Fift
F44F DICTUREPLACEGETB
Category: Dict Set Builder (dict_set_builder)
Fift
F451 DICTADDB
Category: Dict Set Builder (dict_set_builder)
Fift
F452 DICTIADDB
Category: Dict Set Builder (dict_set_builder)
Fift
F453 DICTUADDB
Category: Dict Set Builder (dict_set_builder)
Fift
F455 DICTADDGETB
Category: Dict Set Builder (dict_set_builder)
Fift
F456 DICTIADDGETB
Category: Dict Set Builder (dict_set_builder)
Fift
F457 DICTUADDGETB
Category: Dict Set Builder (dict_set_builder)
Fift
F459 DICTDEL
Deletes n-bit key, represented by a Slice k, from dictionary D. If the key is present, returns the modified dictionary D' and the success flag -1. Otherwise, returns the original dictionary D and 0.Category: Dict Delete (dict_delete)
Fift
F45A DICTIDEL
A version of DICTDEL with the key represented by a signed n-bit Integer i. If i does not fit into n bits, simply returns D 0 (”key not found, dictionary unmodified”).Category: Dict Delete (dict_delete)
Fift
F45B DICTUDEL
Similar to DICTIDEL, but with i an unsigned n-bit integer.Category: Dict Delete (dict_delete)
Fift
F462 DICTDELGET
Deletes n-bit key, represented by a Slice k, from dictionary D. If the key is present, returns the modified dictionary D', the original value x associated with the key k (represented by a Slice), and the success flag -1. Otherwise, returns the original dictionary D and 0.Category: Dict Delete (dict_delete)
Fift
F463 DICTDELGETREF
Similar to DICTDELGET, but with LDREF ENDS applied to x on success, so that the value returned c is a Cell.Category: Dict Delete (dict_delete)
Fift
F464 DICTIDELGET
DICTDELGET, but with i a signed n-bit integer.Category: Dict Delete (dict_delete)
Fift
F465 DICTIDELGETREF
DICTDELGETREF, but with i a signed n-bit integer.Category: Dict Delete (dict_delete)
Fift
F466 DICTUDELGET
DICTDELGET, but with i an unsigned n-bit integer.Category: Dict Delete (dict_delete)
Fift
F467 DICTUDELGETREF
DICTDELGETREF, but with i an unsigned n-bit integer.Category: Dict Delete (dict_delete)
Fift
F469 DICTGETOPTREF
A variant of DICTGETREF that returns Null instead of the value c^? if the key k is absent from dictionary D.Category: Dict Mayberef (dict_mayberef)
Fift
F46A DICTIGETOPTREF
DICTGETOPTREF, but with i a signed n-bit integer. If the key i is out of range, also returns Null.Category: Dict Mayberef (dict_mayberef)
Fift
F46B DICTUGETOPTREF
DICTGETOPTREF, but with i an unsigned n-bit integer. If the key i is out of range, also returns Null.Category: Dict Mayberef (dict_mayberef)
Fift
F46D DICTSETGETOPTREF
A variant of both DICTGETOPTREF and DICTSETGETREF that sets the value corresponding to key k in dictionary D to c^? (if c^? is Null, then the key is deleted instead), and returns the old value ~c^? (if the key k was absent before, returns Null instead).Category: Dict Mayberef (dict_mayberef)
Fift
F46E DICTISETGETOPTREF
Similar to primitive DICTSETGETOPTREF, but using signed n-bit Integer i as a key. If i does not fit into n bits, throws a range checking exception.Category: Dict Mayberef (dict_mayberef)
Fift
F46F DICTUSETGETOPTREF
Similar to primitive DICTSETGETOPTREF, but using unsigned n-bit Integer i as a key.Category: Dict Mayberef (dict_mayberef)
Fift
F470 PFXDICTSET
Category: Dict Prefix (dict_prefix)
Fift
F471 PFXDICTREPLACE
Category: Dict Prefix (dict_prefix)
Fift
F472 PFXDICTADD
Category: Dict Prefix (dict_prefix)
Fift
F473 PFXDICTDEL
Category: Dict Prefix (dict_prefix)
Fift
F474 DICTGETNEXT
Computes the minimal key k' in dictionary D that is lexicographically greater than k, and returns k' (represented by a Slice) along with associated value x' (also represented by a Slice).Category: Dict Next (dict_next)
Fift
F475 DICTGETNEXTEQ
Similar to DICTGETNEXT, but computes the minimal key k' that is lexicographically greater than or equal to k.Category: Dict Next (dict_next)
Fift
F476 DICTGETPREV
Similar to DICTGETNEXT, but computes the maximal key k' lexicographically smaller than k.Category: Dict Next (dict_next)
Fift
F477 DICTGETPREVEQ
Similar to DICTGETPREV, but computes the maximal key k' lexicographically smaller than or equal to k.Category: Dict Next (dict_next)
Fift
F478 DICTIGETNEXT
Similar to DICTGETNEXT, but interprets all keys in dictionary D as big-endian signed n-bit integers, and computes the minimal key i' that is larger than Integer i (which does not necessarily fit into n bits).Category: Dict Next (dict_next)
Fift
F479 DICTIGETNEXTEQ
Similar to DICTGETNEXTEQ, but interprets keys as signed n-bit integers.Category: Dict Next (dict_next)
Fift
F47A DICTIGETPREV
Similar to DICTGETPREV, but interprets keys as signed n-bit integers.Category: Dict Next (dict_next)
Fift
F47B DICTIGETPREVEQ
Similar to DICTGETPREVEQ, but interprets keys as signed n-bit integers.Category: Dict Next (dict_next)
Fift
F47C DICTUGETNEXT
Similar to DICTGETNEXT, but interprets all keys in dictionary D as big-endian unsigned n-bit integers, and computes the minimal key i' that is larger than Integer i (which does not necessarily fit into n bits, and is not necessarily non-negative).Category: Dict Next (dict_next)
Fift
F47D DICTUGETNEXTEQ
Similar to DICTGETNEXTEQ, but interprets keys as unsigned n-bit integers.Category: Dict Next (dict_next)
Fift
F47E DICTUGETPREV
Similar to DICTGETPREV, but interprets keys as unsigned n-bit integers.Category: Dict Next (dict_next)
Fift
F47F DICTUGETPREVEQ
Similar to DICTGETPREVEQ, but interprets keys a unsigned n-bit integers.Category: Dict Next (dict_next)
Fift
F482 DICTMIN
Computes the minimal key k (represented by a Slice with n data bits) in dictionary D, and returns k along with the associated value x.Category: Dict Min (dict_min)
Fift
F483 DICTMINREF
Similar to DICTMIN, but returns the only reference in the value as a Cell c.Category: Dict Min (dict_min)
Fift
F484 DICTIMIN
Similar to DICTMIN, but computes the minimal key i under the assumption that all keys are big-endian signed n-bit integers. Notice that the key and value returned may differ from those computed by DICTMIN and DICTUMIN.Category: Dict Min (dict_min)
Fift
F485 DICTIMINREF
Similar to DICTIMIN, but returns the only reference in the value.Category: Dict Min (dict_min)
Fift
F486 DICTUMIN
Similar to DICTMIN, but returns the key as an unsigned n-bit Integer i.Category: Dict Min (dict_min)
Fift
F487 DICTUMINREF
Similar to DICTUMIN, but returns the only reference in the value.Category: Dict Min (dict_min)
Fift
F48A DICTMAX
Computes the maximal key k (represented by a Slice with n data bits) in dictionary D, and returns k along with the associated value x.Category: Dict Min (dict_min)
Fift
F48B DICTMAXREF
Similar to DICTMAX, but returns the only reference in the value.Category: Dict Min (dict_min)
Fift
F48C DICTIMAX
Similar to DICTMAX, but computes the maximal key i under the assumption that all keys are big-endian signed n-bit integers. Notice that the key and value returned may differ from those computed by DICTMAX and DICTUMAX.Category: Dict Min (dict_min)
Fift
F48D DICTIMAXREF
Similar to DICTIMAX, but returns the only reference in the value.Category: Dict Min (dict_min)
Fift
F48E DICTUMAX
Similar to DICTMAX, but returns the key as an unsigned n-bit Integer i.Category: Dict Min (dict_min)
Fift
F48F DICTUMAXREF
Similar to DICTUMAX, but returns the only reference in the value.Category: Dict Min (dict_min)
Fift
F492 DICTREMMIN
Computes the minimal key k (represented by a Slice with n data bits) in dictionary D, removes k from the dictionary, and returns k along with the associated value x and the modified dictionary D'.Category: Dict Min (dict_min)
Fift
F493 DICTREMMINREF
Similar to DICTREMMIN, but returns the only reference in the value as a Cell c.Category: Dict Min (dict_min)
Fift
F494 DICTIREMMIN
Similar to DICTREMMIN, but computes the minimal key i under the assumption that all keys are big-endian signed n-bit integers. Notice that the key and value returned may differ from those computed by DICTREMMIN and DICTUREMMIN.Category: Dict Min (dict_min)
Fift
F495 DICTIREMMINREF
Similar to DICTIREMMIN, but returns the only reference in the value.Category: Dict Min (dict_min)
Fift
F496 DICTUREMMIN
Similar to DICTREMMIN, but returns the key as an unsigned n-bit Integer i.Category: Dict Min (dict_min)
Fift
F497 DICTUREMMINREF
Similar to DICTUREMMIN, but returns the only reference in the value.Category: Dict Min (dict_min)
Fift
F49A DICTREMMAX
Computes the maximal key k (represented by a Slice with n data bits) in dictionary D, removes k from the dictionary, and returns k along with the associated value x and the modified dictionary D'.Category: Dict Min (dict_min)
Fift
F49B DICTREMMAXREF
Similar to DICTREMMAX, but returns the only reference in the value as a Cell c.Category: Dict Min (dict_min)
Fift
F49C DICTIREMMAX
Similar to DICTREMMAX, but computes the minimal key i under the assumption that all keys are big-endian signed n-bit integers. Notice that the key and value returned may differ from those computed by DICTREMMAX and DICTUREMMAX.Category: Dict Min (dict_min)
Fift
F49D DICTIREMMAXREF
Similar to DICTIREMMAX, but returns the only reference in the value.Category: Dict Min (dict_min)
Fift
F49E DICTUREMMAX
Similar to DICTREMMAX, but returns the key as an unsigned n-bit Integer i.Category: Dict Min (dict_min)
Fift
F49F DICTUREMMAXREF
Similar to DICTUREMMAX, but returns the only reference in the value.Category: Dict Min (dict_min)
Fift
F4A0 DICTIGETJMP
Similar to DICTIGET, but with x BLESSed into a continuation with a subsequent JMPX to it on success. On failure, does nothing. This is useful for implementing switch/case constructions.Category: Dict Special (dict_special)
Fift
F4A1 DICTUGETJMP
Similar to DICTIGETJMP, but performs DICTUGET instead of DICTIGET.Category: Dict Special (dict_special)
Fift
F4A2 DICTIGETEXEC
Similar to DICTIGETJMP, but with EXECUTE instead of JMPX.Category: Dict Special (dict_special)
Fift
F4A3 DICTUGETEXEC
Similar to DICTUGETJMP, but with EXECUTE instead of JMPX.Category: Dict Special (dict_special)
Fift
F4A6_n DICTPUSHCONST
Pushes a non-empty constant dictionary D (as a Cell^?) along with its key length 0 <= n <= 1023, stored as a part of the instruction. The dictionary itself is created from the first of remaining references of the current continuation. In this way, the complete DICTPUSHCONST instruction can be obtained by first serializing xF4A4_, then the non-empty dictionary itself (one 1 bit and a cell reference), and then the unsigned 10-bit integer n (as if by a STU 10 instruction). An empty dictionary can be pushed by a NEWDICT primitive instead.Category: Dict Special (dict_special)
Fift
F4A8 PFXDICTGETQ
Looks up the unique prefix of Slice s present in the prefix code dictionary represented by Cell^? D and 0 <= n <= 1023. If found, the prefix of s is returned as s', and the corresponding value (also a Slice) as x. The remainder of s is returned as a Slice s''. If no prefix of s is a key in prefix code dictionary D, returns the unchanged s and a zero flag to indicate failure.Category: Dict Special (dict_special)
Fift
F4A9 PFXDICTGET
Similar to PFXDICTGET, but throws a cell deserialization failure exception on failure.Category: Dict Special (dict_special)
Fift
F4AA PFXDICTGETJMP
Similar to PFXDICTGETQ, but on success BLESSes the value x into a Continuation and transfers control to it as if by a JMPX. On failure, returns s unchanged and continues execution.Category: Dict Special (dict_special)
Fift
F4AB PFXDICTGETEXEC
Similar to PFXDICTGETJMP, but EXECutes the continuation found instead of jumping to it. On failure, throws a cell deserialization exception.Category: Dict Special (dict_special)
Fift
F4AE_n PFXDICTCONSTGETJMP
Combines [n] DICTPUSHCONST for 0 <= n <= 1023 with PFXDICTGETJMP.Category: Dict Special (dict_special)
Fift
F4BC DICTIGETJMPZ
A variant of DICTIGETJMP that returns index i on failure.Category: Dict Special (dict_special)
Fift
F4BD DICTUGETJMPZ
A variant of DICTUGETJMP that returns index i on failure.Category: Dict Special (dict_special)
Fift
F4BE DICTIGETEXECZ
A variant of DICTIGETEXEC that returns index i on failure.Category: Dict Special (dict_special)
Fift
F4BF DICTUGETEXECZ
A variant of DICTUGETEXEC that returns index i on failure.Category: Dict Special (dict_special)
Fift
F4B1 SUBDICTGET
Constructs a subdictionary consisting of all keys beginning with prefix k (represented by a Slice, the first 0 <= l <= n <= 1023 data bits of which are used as a key) of length l in dictionary D of type HashmapE(n,X) with n-bit keys. On success, returns the new subdictionary of the same type HashmapE(n,X) as a Slice D'.Category: Dict Sub (dict_sub)
Fift
F4B2 SUBDICTIGET
Variant of SUBDICTGET with the prefix represented by a signed big-endian l-bit Integer x, where necessarily l <= 257.Category: Dict Sub (dict_sub)
Fift
F4B3 SUBDICTUGET
Variant of SUBDICTGET with the prefix represented by an unsigned big-endian l-bit Integer x, where necessarily l <= 256.Category: Dict Sub (dict_sub)
Fift
F4B5 SUBDICTRPGET
Similar to SUBDICTGET, but removes the common prefix k from all keys of the new dictionary D', which becomes of type HashmapE(n-l,X).Category: Dict Sub (dict_sub)
Fift
F4B6 SUBDICTIRPGET
Variant of SUBDICTRPGET with the prefix represented by a signed big-endian l-bit Integer x, where necessarily l <= 257.Category: Dict Sub (dict_sub)
Fift
F4B7 SUBDICTURPGET
Variant of SUBDICTRPGET with the prefix represented by an unsigned big-endian l-bit Integer x, where necessarily l <= 256.Category: Dict Sub (dict_sub)
Fift
F800 ACCEPT
Sets current gas limit g_l to its maximal allowed value g_m, and resets the gas credit g_c to zero, decreasing the value of g_r by g_c in the process.In other words, the current smart contract agrees to buy some gas to finish the current transaction. This action is required to process external messages, which bring no value (hence no gas) with themselves.
Category: App Gas (app_gas)
Fift
F801 SETGASLIMIT
Sets current gas limit g_l to the minimum of g and g_m, and resets the gas credit g_c to zero. If the gas consumed so far (including the present instruction) exceeds the resulting value of g_l, an (unhandled) out of gas exception is thrown before setting new gas limits. Notice that SETGASLIMIT with an argument g >= 2^63-1 is equivalent to ACCEPT.Category: App Gas (app_gas)
Fift
F807 GASCONSUMED
Returns gas consumed by VM so far (including this instruction).Category: App Gas (app_gas)
Fift
F80F COMMIT
Commits the current state of registers c4 (”persistent data”) and c5 (”actions”) so that the current execution is considered ”successful” with the saved values even if an exception is thrown later.Category: App Gas (app_gas)
Fift
F810 RANDU256
Generates a new pseudo-random unsigned 256-bit Integer x. The algorithm is as follows: if r is the old value of the random seed, considered as a 32-byte array (by constructing the big-endian representation of an unsigned 256-bit integer), then its sha512(r) is computed; the first 32 bytes of this hash are stored as the new value r' of the random seed, and the remaining 32 bytes are returned as the next random value x.Category: App Rnd (app_rnd)
Fift
F811 RAND
Generates a new pseudo-random integer z in the range 0...y-1 (or y...-1, if y<0). More precisely, an unsigned random value x is generated as in RAND256U; then z:=floor(x*y/2^256) is computed.Equivalent to
RANDU256 256 MULRSHIFT.Category: App Rnd (app_rnd)
Fift
F814 SETRAND
Sets the random seed to unsigned 256-bit Integer x.Category: App Rnd (app_rnd)
Fift
F815 ADDRAND
Mixes unsigned 256-bit Integer x into the random seed r by setting the random seed to Sha of the concatenation of two 32-byte strings: the first with the big-endian representation of the old seed r, and the second with the big-endian representation of x.Category: App Rnd (app_rnd)
Fift
F82i GETPARAM
Returns the i-th parameter from the Tuple provided at c7 for 0 <= i <= 15. Equivalent to c7 PUSHCTR FIRST [i] INDEX.If one of these internal operations fails, throws an appropriate type checking or range checking exception.
Category: App Config (app_config)
Fift
NOW
Returns the current Unix time as an Integer. If it is impossible to recover the requested value starting fromc7, throws a type checking or range checking exception as appropriate.
Equivalent to3 GETPARAM.BLOCKLT
Returns the starting logical time of the current block.
Equivalent to4 GETPARAM.LTIME
Returns the logical time of the current transaction.
Equivalent to5 GETPARAM.RANDSEED
Returns the current random seed as an unsigned 256-bit Integer.
Equivalent to6 GETPARAM.BALANCE
Returns the remaining balance of the smart contract as a Tuple consisting of an Integer (the remaining Gram balance in nanograms) and a Maybe Cell (a dictionary with 32-bit keys representing the balance of ”extra currencies”).
Equivalent to7 GETPARAM.
Note thatRAWprimitives such asSENDRAWMSGdo not update this field.MYADDR
Returns the internal address of the current smart contract as a Slice with aMsgAddressInt. If necessary, it can be parsed further using primitives such asPARSEMSGADDRorREWRITESTDADDR.
Equivalent to8 GETPARAM.CONFIGROOT
Returns the Maybe CellDwith the current global configuration dictionary. Equivalent to9 GETPARAM.MYCODE
Retrieves code of smart-contract from c7. Equivalent to10 GETPARAM.INCOMINGVALUE
Retrieves value of incoming message from c7. Equivalent to11 GETPARAM.STORAGEFEES
Retrieves value of storage phase fees from c7. Equivalent to12 GETPARAM.PREVBLOCKSINFOTUPLE
Retrives PrevBlocksInfo:[last_mc_blocks, prev_key_block]from c7. Equivalent to13 GETPARAM.UNPACKEDCONFIGTUPLE
Retrives tuple that contains some config parameters as cell slices. If the parameter is absent from the config, the value is null. Values:
* 0:StoragePricesfromConfigParam 18. Not the whole dict, but only the one StoragePrices entry (one which corresponds to the current time).
* 1:ConfigParam 19(global id).
* 2:ConfigParam 20(mc gas prices).
* 3:ConfigParam 21(gas prices).
* 4:ConfigParam 24(mc fwd fees).
* 5:ConfigParam 25(fwd fees).
* 6:ConfigParam 43(size limits).DUEPAYMENT
Retrives current debt for storage fee (nanotons).
F830 CONFIGDICT
Returns the global configuration dictionary along with its key length (32).Equivalent to
CONFIGROOT 32 PUSHINT.Category: App Config (app_config)
Fift
F832 CONFIGPARAM
Returns the value of the global configuration parameter with integer index i as a Cell c, and a flag to indicate success.Equivalent to
CONFIGDICT DICTIGETREF.Category: App Config (app_config)
Fift
F833 CONFIGOPTPARAM
Returns the value of the global configuration parameter with integer index i as a Maybe Cell c^?.Equivalent to
CONFIGDICT DICTIGETOPTREF.Category: App Config (app_config)
Fift
F83400 PREVMCBLOCKS
Retrives last_mc_blocks part of PrevBlocksInfo from c7 (parameter 13).Category: App Config (app_config)
Fift
F83401 PREVKEYBLOCK
Retrives prev_key_block part of PrevBlocksInfo from c7 (parameter 13).Category: App Config (app_config)
Fift
F83402 PREVMCBLOCKS_100
Retrives last_mc_blocks_divisible_by_100 part of PrevBlocksInfo from c7 (parameter 13).Category: App Config (app_config)
Fift
F835 GLOBALID
Retrieves global_id from 19 network config.Category: App Config (app_config)
Fift
F836 GETGASFEE
Calculates gas feeCategory: App Config (app_config)
Fift
F837 GETSTORAGEFEE
Calculates storage fees (only current StoragePrices entry is used).Category: App Config (app_config)
Fift
F838 GETFORWARDFEE
Calculates forward fee.Category: App Config (app_config)
Fift
F839 GETPRECOMPILEDGAS
Returns gas usage for the current contract if it is precompiled, null otherwise.Category: App Config (app_config)
Fift
F83A GETORIGINALFWDFEE
Calculate (fwd_fee * 2^16) / (2^16 - first_frac). Can be used to get the original fwd_fee of the message.Category: App Config (app_config)
Fift
F83B GETGASFEESIMPLE
Same as GETGASFEE, but without flat price (just (gas_used * price) / 2^16).Category: App Config (app_config)
Fift
F83C GETFORWARDFEESIMPLE
Same as GETFORWARDFEE, but without lump price (just (bits*bit_price + cells*cell_price) / 2^16).Category: App Config (app_config)
Fift
F840 GETGLOBVAR
Returns the k-th global variable for 0 <= k < 255.Equivalent to
c7 PUSHCTR SWAP INDEXVARQ.Category: App Global (app_global)
Fift
F85_k GETGLOB
Returns the k-th global variable for 1 <= k <= 31.Equivalent to
c7 PUSHCTR [k] INDEXQ.Category: App Global (app_global)
Fift
F860 SETGLOBVAR
Assigns x to the k-th global variable for 0 <= k < 255.Equivalent to
c7 PUSHCTR ROTREV SETINDEXVARQ c7 POPCTR.Category: App Global (app_global)
Fift
F87_k SETGLOB
Assigns x to the k-th global variable for 1 <= k <= 31.Equivalent to
c7 PUSHCTR SWAP k SETINDEXQ c7 POPCTR.Category: App Global (app_global)
Fift
F880 GETEXTRABALANCE
Takes id of the extra currency (integer in range 0..2^32-1), returns the amount of this extra currency on the account balance. The first 5 executions of GETEXTRABALANCE consume at most 26 + 200 gas each. The subsequent executions incur the full gas cost of 26 (normal instruction cost) plus gas for loading cells (up to 3300 if the dictionary has maximum depth).Category: App Global (app_global)
Fift
F881ii GETPARAMLONG
Returns the i-th parameter from the Tuple provided at c7 for 0 <= i <= 255. Equivalent to c7 PUSHCTR FIRST [i] INDEX.If one of these internal operations fails, throws an appropriate type checking or range checking exception.
Category: App Config (app_config)
Fift
F89i INMSGPARAM
Equivalent to INMSGPARAMS i INDEXCategory: App Config (app_config)
Fift
INMSG_BOUNCE
Retrivesbounceflag of incoming message.INMSG_BOUNCED
Retrivesbouncedflag of incoming message.INMSG_SRC
Retrivessrcflag of incoming message.INMSG_FWDFEE
Retrivesfwd_feefield of incoming message.INMSG_LT
Retrivesltfield of incoming message.INMSG_UTIME
Retrivesutimefield of incoming message.INMSG_ORIGVALUE
Retrives original value of the message. This is sometimes different from the value inINCOMINGVALUEand TVM stack because of storage fees.INMSG_VALUE
Retrives value of the message after deducting storage fees. This is same as inINCOMINGVALUEand TVM stack.INMSG_VALUEEXTRA
Same as inINCOMINGVALUE.INMSG_STATEINIT
Retrievesinitfield of the incoming message.
F900 HASHCU
Computes the representation hash of a Cell c and returns it as a 256-bit unsigned integer x. Useful for signing and checking signatures of arbitrary entities represented by a tree of cells.Category: App Crypto (app_crypto)
Fift
F901 HASHSU
Computes the hash of a Slice s and returns it as a 256-bit unsigned integer x. The result is the same as if an ordinary cell containing only data and references from s had been created and its hash computed by HASHCU.Category: App Crypto (app_crypto)
Fift
F902 SHA256U
Computes Sha of the data bits of Slice s. If the bit length of s is not divisible by eight, throws a cell underflow exception. The hash value is returned as a 256-bit unsigned integer x.Category: App Crypto (app_crypto)
Fift
F90400 HASHEXT_SHA256
Calculates and returns hash of the concatenation of slices (or builders) s_1...s_n.Category: App Crypto (app_crypto)
Fift
F90401 HASHEXT_SHA512
Calculates and returns hash of the concatenation of slices (or builders) s_1...s_n.Category: App Crypto (app_crypto)
Fift
F90402 HASHEXT_BLAKE2B
Calculates and returns hash of the concatenation of slices (or builders) s_1...s_n.Category: App Crypto (app_crypto)
Fift
F90403 HASHEXT_KECCAK256
Calculates and returns hash of the concatenation of slices (or builders) s_1...s_n.Category: App Crypto (app_crypto)
Fift
F90404 HASHEXT_KECCAK512
Calculates and returns hash of the concatenation of slices (or builders) s_1...s_n.Category: App Crypto (app_crypto)
Fift
F90500 HASHEXTR_SHA256
Calculates and returns hash of the concatenation of slices (or builders) s_1...s_n.Category: App Crypto (app_crypto)
Fift
F90501 HASHEXTR_SHA512
Calculates and returns hash of the concatenation of slices (or builders) s_1...s_n.Category: App Crypto (app_crypto)
Fift
F90502 HASHEXTR_BLAKE2B
Calculates and returns hash of the concatenation of slices (or builders) s_1...s_n.Category: App Crypto (app_crypto)
Fift
F90503 HASHEXTR_KECCAK256
Calculates and returns hash of the concatenation of slices (or builders) s_1...s_n.Category: App Crypto (app_crypto)
Fift
F90504 HASHEXTR_KECCAK512
Calculates and returns hash of the concatenation of slices (or builders) s_1...s_n.Category: App Crypto (app_crypto)
Fift
F90600 HASHEXTA_SHA256
Calculates hash of the concatenation of slices (or builders) s_1...s_n. Appends the resulting hash to a builder b.Category: App Crypto (app_crypto)
Fift
F90601 HASHEXTA_SHA512
Calculates hash of the concatenation of slices (or builders) s_1...s_n. Appends the resulting hash to a builder b.Category: App Crypto (app_crypto)
Fift
F90602 HASHEXTA_BLAKE2B
Calculates hash of the concatenation of slices (or builders) s_1...s_n. Appends the resulting hash to a builder b.Category: App Crypto (app_crypto)
Fift
F90603 HASHEXTA_KECCAK256
Calculates hash of the concatenation of slices (or builders) s_1...s_n. Appends the resulting hash to a builder b.Category: App Crypto (app_crypto)
Fift
F90604 HASHEXTA_KECCAK512
Calculates hash of the concatenation of slices (or builders) s_1...s_n. Appends the resulting hash to a builder b.Category: App Crypto (app_crypto)
Fift
F90700 HASHEXTAR_SHA256
Calculates hash of the concatenation of slices (or builders) s_1...s_n. Appends the resulting hash to a builder b.Category: App Crypto (app_crypto)
Fift
F90701 HASHEXTAR_SHA512
Calculates hash of the concatenation of slices (or builders) s_1...s_n. Appends the resulting hash to a builder b.Category: App Crypto (app_crypto)
Fift
F90702 HASHEXTAR_BLAKE2B
Calculates hash of the concatenation of slices (or builders) s_1...s_n. Appends the resulting hash to a builder b.Category: App Crypto (app_crypto)
Fift
F90703 HASHEXTAR_KECCAK256
Calculates hash of the concatenation of slices (or builders) s_1...s_n. Appends the resulting hash to a builder b.Category: App Crypto (app_crypto)
Fift
F90704 HASHEXTAR_KECCAK512
Calculates hash of the concatenation of slices (or builders) s_1...s_n. Appends the resulting hash to a builder b.Category: App Crypto (app_crypto)
Fift
F910 CHKSIGNU
Checks the Ed25519-signature s of a hash h (a 256-bit unsigned integer, usually computed as the hash of some data) using public key k (also represented by a 256-bit unsigned integer).The signature
s must be a Slice containing at least 512 data bits; only the first 512 bits are used. The result is -1 if the signature is valid, 0 otherwise.Notice that
CHKSIGNU is equivalent to ROT NEWC 256 STU ENDC ROTREV CHKSIGNS, i.e., to CHKSIGNS with the first argument d set to 256-bit Slice containing h. Therefore, if h is computed as the hash of some data, these data are hashed twice, the second hashing occurring inside CHKSIGNS.Category: App Crypto (app_crypto)
Fift
F911 CHKSIGNS
Checks whether s is a valid Ed25519-signature of the data portion of Slice d using public key k, similarly to CHKSIGNU. If the bit length of Slice d is not divisible by eight, throws a cell underflow exception. The verification of Ed25519 signatures is the standard one, with Sha used to reduce d to the 256-bit number that is actually signed.Category: App Crypto (app_crypto)
Fift
F912 ECRECOVER
Recovers the public key from a secp256k1 signature, identical to Bitcoin/Ethereum operations. Takes a 32-byte hash as uint256 hash and a 65-byte signature as uint8 v, uint256 r, and uint256 s. In TON, the v value is strictly 0 or 1; no extra flags or extended values are supported. If the public key cannot be recovered, the instruction returns 0. On success, it returns the recovered 65-byte public key as uint8 h, uint256 x1, and uint256 x2, followed by -1.Category: App Crypto (app_crypto)
Fift
F913 SECP256K1_XONLY_PUBKEY_TWEAK_ADD
performs secp256k1_xonly_pubkey_tweak_add. key and tweak are 256-bit unsigned integers. 65-byte public key is returned as uint8 f, uint256 x, y (as in ECRECOVER).Category: App Crypto (app_crypto)
Fift
F914 P256_CHKSIGNU
Checks seck256r1-signature sig of a number h (a 256-bit unsigned integer, usually computed as the hash of some data) and public key k. Returns -1 on success, 0 on failure. Public key is a 33-byte slice (encoded according to Sec. 2.3.4 point 2 of SECG SEC 1). Signature sig is a 64-byte slice (two 256-bit unsigned integers r and s).Category: App Crypto (app_crypto)
Fift
F915 P256_CHKSIGNS
Checks seck256r1-signature sig of data portion of slice d and public key k. Returns -1 on success, 0 on failure. Public key is a 33-byte slice (encoded according to Sec. 2.3.4 point 2 of SECG SEC 1). Signature sig is a 64-byte slice (two 256-bit unsigned integers r and s).Category: App Crypto (app_crypto)
Fift
F916 HASHBU
Same as ENDC HASHCU, but without gas cost for cell creation.Category: App Crypto (app_crypto)
Fift
F920 RIST255_FROMHASH
Deterministically generates a valid point x from a 512-bit hash (given as two 256-bit integers).Category: App Crypto (app_crypto)
Fift
F921 RIST255_VALIDATE
Checks that integer x is a valid representation of some curve point. Throws range_chk on error.Category: App Crypto (app_crypto)
Fift
F922 RIST255_ADD
Addition of two points on a curve.Category: App Crypto (app_crypto)
Fift
F923 RIST255_SUB
Subtraction of two points on curve.Category: App Crypto (app_crypto)
Fift
F924 RIST255_MUL
Multiplies point x by a scalar n. Any n is valid, including negative.Category: App Crypto (app_crypto)
Fift
F925 RIST255_MULBASE
Multiplies the generator point g by a scalar n. Any n is valid, including negative.Category: App Crypto (app_crypto)
Fift
F926 RIST255_PUSHL
Pushes integer l=2^252+27742317777372353535851937790883648493, which is the order of the group.Category: App Crypto (app_crypto)
Fift
B7F921 RIST255_QVALIDATE
Checks that integer x is a valid representation of some curve point. Returns -1 on success and 0 on failure.Category: App Crypto (app_crypto)
Fift
B7F922 RIST255_QADD
Addition of two points on a curve. Returns -1 on success and 0 on failure.Category: App Crypto (app_crypto)
Fift
B7F923 RIST255_QSUB
Subtraction of two points on curve. Returns -1 on success and 0 on failure.Category: App Crypto (app_crypto)
Fift
B7F924 RIST255_QMUL
Multiplies point x by a scalar n. Any n is valid, including negative. Returns -1 on success and 0 on failure.Category: App Crypto (app_crypto)
Fift
B7F925 RIST255_QMULBASE
Multiplies the generator point g by a scalar n. Any n is valid, including negative.Category: App Crypto (app_crypto)
Fift
F93000 BLS_VERIFY
Checks BLS signature, return true on success, false otherwise.Category: App Crypto (app_crypto)
Fift
F93001 BLS_AGGREGATE
Aggregates signatures. n>0. Throw exception if n=0 or if some sig_i is not a valid signature.Category: App Crypto (app_crypto)
Fift
F93002 BLS_FASTAGGREGATEVERIFY
Checks aggregated BLS signature for keys pk_1...pk_n and message msg. Return true on success, false otherwise. Return false if n=0.Category: App Crypto (app_crypto)
Fift
F93003 BLS_AGGREGATEVERIFY
Checks aggregated BLS signature for key-message pairs pk_1 msg_1...pk_n msg_n. Return true on success, false otherwise. Return false if n=0.Category: App Crypto (app_crypto)
Fift
F93010 BLS_G1_ADD
Addition on G1.Category: App Crypto (app_crypto)
Fift
F93011 BLS_G1_SUB
Subtraction on G1.Category: App Crypto (app_crypto)
Fift
F93012 BLS_G1_NEG
Negation on G1.Category: App Crypto (app_crypto)
Fift
F93013 BLS_G1_MUL
Multiplies G1 point x by scalar s. Any s is valid, including negative.Category: App Crypto (app_crypto)
Fift
F93014 BLS_G1_MULTIEXP
Calculates x_1*s_1+...+x_n*s_n for G1 points x_i and scalars s_i. Returns zero point if n=0. Any s_i is valid, including negative.Category: App Crypto (app_crypto)
Fift
F93015 BLS_G1_ZERO
Pushes zero point in G1.Category: App Crypto (app_crypto)
Fift
F93016 BLS_MAP_TO_G1
Converts FP element f to a G1 point.Category: App Crypto (app_crypto)
Fift
F93017 BLS_G1_INGROUP
Checks that slice x represents a valid element of G1.Category: App Crypto (app_crypto)
Fift
F93018 BLS_G1_ISZERO
Checks that G1 point x is equal to zero.Category: App Crypto (app_crypto)
Fift
F93020 BLS_G2_ADD
Addition on G2.Category: App Crypto (app_crypto)
Fift
F93021 BLS_G2_SUB
Subtraction on G2.Category: App Crypto (app_crypto)
Fift
F93022 BLS_G2_NEG
Negation on G2.Category: App Crypto (app_crypto)
Fift
F93023 BLS_G2_MUL
Multiplies G2 point x by scalar s. Any s is valid, including negative.Category: App Crypto (app_crypto)
Fift
F93024 BLS_G2_MULTIEXP
Calculates x_1*s_1+...+x_n*s_n for G2 points x_i and scalars s_i. Returns zero point if n=0. Any s_i is valid, including negative.Category: App Crypto (app_crypto)
Fift
F93025 BLS_G2_ZERO
Pushes zero point in G2.Category: App Crypto (app_crypto)
Fift
F93026 BLS_MAP_TO_G2
Converts FP2 element f to a G2 point.Category: App Crypto (app_crypto)
Fift
F93027 BLS_G2_INGROUP
Checks that slice x represents a valid element of G2.Category: App Crypto (app_crypto)
Fift
F93028 BLS_G2_ISZERO
Checks that G2 point x is equal to zero.Category: App Crypto (app_crypto)
Fift
F93030 BLS_PAIRING
Given G1 points x_i and G2 points y_i, calculates and multiply pairings of x_i,y_i. Returns true if the result is the multiplicative identity in FP12, false otherwise. Returns false if n=0.Category: App Crypto (app_crypto)
Fift
F93031 BLS_PUSHR
Pushes the order of G1 and G2 (approx. 2^255).Category: App Crypto (app_crypto)
Fift
F940 CDATASIZEQ
Recursively computes the count of distinct cells x, data bits y, and cell references z in the dag rooted at Cell c, effectively returning the total storage used by this dag taking into account the identification of equal cells. The values of x, y, and z are computed by a depth-first traversal of this dag, with a hash table of visited cell hashes used to prevent visits of already-visited cells. The total count of visited cells x cannot exceed non-negative Integer n; otherwise the computation is aborted before visiting the (n+1)-st cell and a zero is returned to indicate failure. If c is Null, returns x=y=z=0.Category: App Misc (app_misc)
Fift
F941 CDATASIZE
A non-quiet version of CDATASIZEQ that throws a cell overflow exception (8) on failure.Category: App Misc (app_misc)
Fift
F942 SDATASIZEQ
Similar to CDATASIZEQ, but accepting a Slice s instead of a Cell. The returned value of x does not take into account the cell that contains the slice s itself; however, the data bits and the cell references of s are accounted for in y and z.Category: App Misc (app_misc)
Fift
F943 SDATASIZE
A non-quiet version of SDATASIZEQ that throws a cell overflow exception (8) on failure.Category: App Misc (app_misc)
Fift
FA00 LDGRAMS
Loads (deserializes) a Gram or VarUInteger 16 amount from Slice s, and returns the amount as Integer x along with the remainder s' of s. The expected serialization of x consists of a 4-bit unsigned big-endian integer l, followed by an 8l-bit unsigned big-endian representation of x.The net effect is approximately equivalent to
4 LDU SWAP 3 LSHIFT# LDUX.Category: App Currency (app_currency)
Fift
FA01 LDVARINT16
Similar to LDVARUINT16, but loads a signed Integer x.Approximately equivalent to
4 LDU SWAP 3 LSHIFT# LDIX.Category: App Currency (app_currency)
Fift
FA02 STGRAMS
Stores (serializes) an Integer x in the range 0...2^120-1 into Builder b, and returns the resulting Builder b'. The serialization of x consists of a 4-bit unsigned big-endian integer l, which is the smallest integer l>=0, such that x<2^(8l), followed by an 8l-bit unsigned big-endian representation of x. If x does not belong to the supported range, a range check exception is thrown.Category: App Currency (app_currency)
Fift
FA03 STVARINT16
Similar to STVARUINT16, but serializes a signed Integer x in the range -2^119...2^119-1.Category: App Currency (app_currency)
Fift
FA04 LDVARUINT32
Loads (deserializes) a VarUInteger 32 amount from Slice s, and returns the amount as Integer x along with the remainder s' of s. The expected serialization of x consists of a 5-bit unsigned big-endian integer l, followed by an 8l-bit unsigned big-endian representation of x.The net effect is approximately equivalent to
4 LDU SWAP 3 LSHIFT# LDUX.Category: App Currency (app_currency)
Fift
FA05 LDVARINT32
Similar to LDVARUINT32, but loads a signed Integer x.Approximately equivalent to
5 LDU SWAP 3 LSHIFT# LDIX.Category: App Currency (app_currency)
Fift
FA06 STVARUINT32
Stores (serializes) an Integer x in the range 0...2^248-1 into Builder b, and returns the resulting Builder b'. The serialization of x consists of a 5-bit unsigned big-endian integer l, which is the smallest integer l>=0, such that x<2^(8l), followed by an 8l-bit unsigned big-endian representation of x. If x does not belong to the supported range, a range check exception is thrown.Category: App Currency (app_currency)
Fift
FA07 STVARINT32
Similar to STVARUINT32, but serializes a signed Integer x in the range -2^247...2^247-1.Category: App Currency (app_currency)
Fift
FA40 LDMSGADDR
Loads from Slice s the only prefix that is a valid MsgAddress, and returns both this prefix s' and the remainder s'' of s as slices.Category: App Addr (app_addr)
Fift
FA41 LDMSGADDRQ
A quiet version of LDMSGADDR: on success, pushes an extra -1; on failure, pushes the original s and a zero.Category: App Addr (app_addr)
Fift
FA42 PARSEMSGADDR
Decomposes Slice s containing a valid MsgAddress into a Tuple t with separate fields of this MsgAddress. If s is not a valid MsgAddress, a cell deserialization exception is thrown.Category: App Addr (app_addr)
Fift
FA43 PARSEMSGADDRQ
A quiet version of PARSEMSGADDR: returns a zero on error instead of throwing an exception.Category: App Addr (app_addr)
Fift
FA44 REWRITESTDADDR
Parses Slice s containing a valid MsgAddressInt (usually a msg_addr_std), applies rewriting from the anycast (if present) to the same-length prefix of the address, and returns both the workchain x and the 256-bit address y as integers. If the address is not 256-bit, or if s is not a valid serialization of MsgAddressInt, throws a cell deserialization exception.Category: App Addr (app_addr)
Fift
FA45 REWRITESTDADDRQ
A quiet version of primitive REWRITESTDADDR.Category: App Addr (app_addr)
Fift
FA46 REWRITEVARADDR
msg_addr_var not allowed since TVM v10, so it behaves like REWRITESTDADDR, but returns account id in Slice, not Integer: parses address s into workchain x and account id s.Category: App Addr (app_addr)
Fift
FA47 REWRITEVARADDRQ
A quiet version of primitive REWRITEVARADDR.Category: App Addr (app_addr)
Fift
FA48 LDSTDADDR
Loads addr_std$10, if address is not addr_std, throws an error 9 (cannot load a MsgAddressInt).Category: App Addr (app_addr)
Fift
FA49 LDSTDADDRQ
A quiet version of primitive LDSTDADDR.Category: App Addr (app_addr)
Fift
FA50 LDOPTSTDADDR
Loads addr_std$10 or addr_none$00, if address is addr_none$00 pushes a Null, if address is not addr_std or addr_none, throws an error 9 (cannot load a MsgAddressInt).Category: App Addr (app_addr)
Fift
FA51 LDOPTSTDADDRQ
A quiet version of primitive LDOPTSTDADDR.Category: App Addr (app_addr)
Fift
FA52 STSTDADDR
Stores addr_std$10, if address is not addr_std, throws an error 9 (cannot load a MsgAddressInt).Category: App Addr (app_addr)
Fift
FA53 STSTDADDRQ
A quiet version of primitive STSTDADDR.Category: App Addr (app_addr)
Fift
FA54 STOPTSTDADDR
stores addr_std$10 or Null. Null is stored as addr_none$00, if address is not addr_std, throws an error 9 (cannot load a MsgAddressInt).Category: App Addr (app_addr)
Fift
FA55 STOPTSTDADDRQ
A quiet version of primitive STOPTSTDADDR.Category: App Addr (app_addr)
Fift
FB00 SENDRAWMSG
Sends a raw message contained in Cell c, which should contain a correctly serialized object Message X, with the only exception that the source address is allowed to have dummy value addr_none (to be automatically replaced with the current smart-contract address), and ihr_fee, fwd_fee, created_lt and created_at fields can have arbitrary values (to be rewritten with correct values during the action phase of the current transaction). Integer parameter x contains the flags. Currently x=0 is used for ordinary messages; x=128 is used for messages that are to carry all the remaining balance of the current smart contract (instead of the value originally indicated in the message); x=64 is used for messages that carry all the remaining value of the inbound message in addition to the value initially indicated in the new message (if bit 0 is not set, the gas fees are deducted from this amount); x'=x+1 means that the sender wants to pay transfer fees separately; x'=x+2 means that any errors arising while processing this message during the action phase should be ignored. Finally, x'=x+32 means that the current account must be destroyed if its resulting balance is zero. This flag is usually employed together with +128.Category: App Actions (app_actions)
Fift
FB02 RAWRESERVE
Creates an output action which would reserve exactly x nanograms (if y=0), at most x nanograms (if y=2), or all but x nanograms (if y=1 or y=3), from the remaining balance of the account. It is roughly equivalent to creating an outbound message carrying x nanograms (or b-x nanograms, where b is the remaining balance) to oneself, so that the subsequent output actions would not be able to spend more money than the remainder. Bit +2 in y means that the external action does not fail if the specified amount cannot be reserved; instead, all remaining balance is reserved. Bit +8 in y means x:=-x before performing any further actions. Bit +4 in y means that x is increased by the original balance of the current account (before the compute phase), including all extra currencies, before performing any other checks and actions. Currently x must be a non-negative integer, and y must be in the range 0...15.Category: App Actions (app_actions)
Fift
FB03 RAWRESERVEX
Similar to RAWRESERVE, but also accepts a dictionary D (represented by a Cell or Null) with extra currencies. In this way currencies other than Grams can be reserved.Category: App Actions (app_actions)
Fift
FB04 SETCODE
Creates an output action that would change this smart contract code to that given by Cell c. Notice that this change will take effect only after the successful termination of the current run of the smart contract.Category: App Actions (app_actions)
Fift
FB06 SETLIBCODE
Creates an output action that would modify the collection of this smart contract libraries by adding or removing library with code given in Cell c. If x=0, the library is actually removed if it was previously present in the collection (if not, this action does nothing). If x=1, the library is added as a private library, and if x=2, the library is added as a public library (and becomes available to all smart contracts if the current smart contract resides in the masterchain); if the library was present in the collection before, its public/private status is changed according to x. Values of x other than 0...2 are invalid.Category: App Actions (app_actions)
Fift
FB07 CHANGELIB
Creates an output action similarly to SETLIBCODE, but instead of the library code accepts its hash as an unsigned 256-bit integer h. If x!=0 and the library with hash h is absent from the library collection of this smart contract, this output action will fail.Category: App Actions (app_actions)
Fift
FB08 SENDMSG
Creates an output action and returns a fee for creating a message. Mode has the same effect as in the case of SENDRAWMSG. Additionally +1024 means - do not create an action, only estimate fee. Other modes affect the fee calculation as follows: +64 substitutes the entire balance of the incoming message as an outcoming value (slightly inaccurate, gas expenses that cannot be estimated before the computation is completed are not taken into account), +128 substitutes the value of the entire balance of the contract before the start of the computation phase (slightly inaccurate, since gas expenses that cannot be estimated before the completion of the computation phase are not taken into account).Category: App Actions (app_actions)
Fift
FEij DEBUG
Category: Debug (debug)
Fift
DUMPSTK
Dumps the stack (at most the top 255 values) and shows the total stack depth. Does nothing on production versions of TVM.STRDUMP
Dumps slice with length divisible by 8 from top of stack as a string. Does nothing on production versions of TVM.DUMP
Dumps slice with length divisible by 8 from top of stack as a string. Does nothing on production versions of TVM.
FEFnssss DEBUGSTR
0 <= n < 16. Length of ssss is n+1 bytes.{string} is a string literal.DEBUGSTR: ssss is the given string.DEBUGSTRI: ssss is one-byte integer 0 <= x <= 255 followed by the given string.Category: Debug (debug)
Fift
FFnn SETCP
Selects TVM codepage 0 <= nn < 240. If the codepage is not supported, throws an invalid opcode exception.Category: Codepage (codepage)
Fift
SETCP0
Selects TVM (test) codepage zero as described in this document.
FFFz SETCP_SPECIAL
Selects TVM codepage z-16 for 1 <= z <= 15. Negative codepages -13...-1 are reserved for restricted versions of TVM needed to validate runs of TVM in other codepages. Negative codepage -14 is reserved for experimental codepages, not necessarily compatible between different TVM implementations, and should be disabled in the production versions of TVM.Category: Codepage (codepage)
Fift
FFF0 SETCPX
Selects codepage c with -2^15 <= c < 2^15 passed in the top of the stack.Category: Codepage (codepage)
Fift